1 camera cable connector | 2 | display cable connector | |
|
|
|
|
3
14.Remove the two screws (one on each side) that secure the display assembly to the computer base.
1 | display assembly | 2 | screws (2) |
|
|
|
|
15. Lift the display assembly off the computer.
Replacing the Display Assembly
1.Follow the procedures in Before You Begin.
2.Place the display assembly in position and replace the two screws (one on each side) that secure the display assembly to the computer base.
3.Route the
4.Connect the antenna cables to the WWAN card, if applicable (see Replacing the WWAN Card).
5.Connect the antenna cables to the WLAN card, if applicable (see Replacing the WLAN Card).