1 | power button cable | 2 | screws (4) |
3palm rest bracket
10.Lift the palm rest bracket off the computer base.
Replacing the Palm Rest Bracket
1.Follow the procedure in Before You Begin.
2.Place the palm rest bracket on the computer base.
3.Replace the four screws that secure the palm rest bracket to the computer base.
4.Connect the power button cable to the system board connector.
5.Turn the computer over and replace the four screws that secure the palm rest bracket to the computer base.
6.Replace the hard drive (see Replacing the Hard Drive).
7.Replace the speakers (see Replacing the Speakers).
8.Replace the palm rest (see Replacing the Palm Rest).
9.Replace the keyboard (see Replacing the Keyboard).
10.Replace the battery (see Replacing the Battery).
CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may result in damage to the computer.