6.Connect the display cable and the camera cable to the system board connectors.
7.Replace the I/O board (see Replacing the I/O Board).
8.Replace the palm rest bracket (see Replacing the Palm Rest Bracket).
9.Replace the memory module (see Replacing the Memory Module).
10.Replace the hard drive (see Replacing the Hard Drive).
11.Connect the speaker cable to the speaker cable connector on the I/O board (see Replacing the Speakers).
12.Replace the palm rest (see Replacing the Palm Rest).
13.Replace the keyboard (see Replacing the Keyboard).
14.Replace the battery (see Replacing the Battery).
CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may result in damage to the computer.
Hinge Caps
Removing the Hinge Caps
1.Follow the procedures in Before You Begin.
2.Remove the display assembly (see Removing the Display Assembly).
3.Press both sides of each hinge cap and lift the hinge caps out.
1 | hinge caps (2) |
|
|
Replacing the Hinge Caps
1.Follow the procedures in Before You Begin.
2.Place the hinge caps on the hinges and push them in.
3.Replace the display assembly (see Replacing the Display Assembly).
CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may result in damage to the computer.