Dell D410 manual Back to Contents

Page 31

1. Follow all of the steps in "Removing the System Board" in reverse order.

NOTICE: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may result in damage to the computer.

2. Turn on the computer.

NOTE: After replacing the system board, enter the computer Service Tag sequence into the BIOS of the replacement system board.

3.Insert the CD that accompanied the replacement system board into the appropriate drive. Follow the instructions that appear on the screen.

Back to Contents Page

Image 31

Contents January 2005 Rev. A00 Preparing to Work Inside the Computer Before You BeginComputer Orientation Recommended ToolsScrew Identification Back to Contents Flashing the Bios Internal Card With Bluetooth Wireless Technology Replace the battery Removing the Coin-Cell Battery Coin-Cell BatteryReplacing the Coin-Cell Battery Removing the Center Control Cover Center Control CoverReplacing the Center Control Cover Removing the Display Assembly Display AssemblyReplacing the Display Assembly Back to Contents Removing the Fan FanReplacing the Fan Page Removing the Hard Drive Hard DriveReplacing the Hard Drive Page Removing the Keyboard KeyboardReplacing the Keyboard Removing the Mini PCI Card Mini PCI CardReplacing the Mini PCI Card Replace the center control cover Back to Contents Removing the Palm Rest Palm RestPage Replacing the Palm Rest USB Connector Pin Assignments for I/O ConnectorsVideo Connector Removing the Smart Card Reader Smart Card ReaderReplacing the Smart Card Reader Replace the M2 x 3-mm screw Removing the System Board System BoardReplacing the System Board Back to Contents System Components January 2005 Rev. A00 Memory Module Memory Module and ModemRemoving the Memory Module from Dimm B Replacing the Memory Module in Dimm B ModemRemoving the Modem Replacing the Modem

Related manuals

Manual 107 pages 60.63 Kb

Manual 110 pages 17.6 Kb