Dell D410 manual Removing the Center Control Cover, Replacing the Center Control Cover

Page 10

Back to Contents Page

Center Control Cover

Dell™ Latitude™ D410 Service Manual

Removing the Center Control Cover

Replacing the Center Control Cover

Removing the Center Control Cover

CAUTION: Before you begin any of the procedures in this section, follow the safety instructions located in the Product Information Guide.

NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the computer.

1.Follow the instructions in "Preparing to Work Inside the Computer."

2.Open the display all the way (180 degrees) so that it lies flat against your work surface.

3.Starting on the right side of the computer, use a plastic scribe to gently pry up the center control cover. Unsnap from right to left.

Replacing the Center Control Cover

Gently snap the cover back in place starting from left to right.

Back to Contents Page

Page 9 Page 11
Image 10
Page 9 Page 11
Contents January 2005 Rev. A00 Before You Begin Preparing to Work Inside the ComputerComputer Orientation Recommended ToolsScrew Identification Back to Contents Flashing the Bios Internal Card With Bluetooth Wireless Technology Replace the battery Coin-Cell Battery Removing the Coin-Cell BatteryReplacing the Coin-Cell Battery Removing the Center Control Cover Center Control CoverReplacing the Center Control Cover Display Assembly Removing the Display AssemblyReplacing the Display Assembly Back to Contents Removing the Fan FanReplacing the Fan Page Removing the Hard Drive Hard DriveReplacing the Hard Drive Page Keyboard Removing the KeyboardReplacing the Keyboard Mini PCI Card Removing the Mini PCI CardReplacing the Mini PCI Card Replace the center control cover Back to Contents Palm Rest Removing the Palm RestPage Replacing the Palm Rest USB Connector Pin Assignments for I/O ConnectorsVideo Connector Removing the Smart Card Reader Smart Card ReaderReplacing the Smart Card Reader Replace the M2 x 3-mm screw System Board Removing the System BoardReplacing the System Board Back to Contents System Components January 2005 Rev. A00 Memory Module and Modem Memory ModuleRemoving the Memory Module from Dimm B Modem Replacing the Memory Module in Dimm BRemoving the Modem Replacing the Modem
Related manuals
Manual 107 pages 60.63 Kb Manual 110 pages 17.6 Kb
Top Page Image Contents