Dell MD3220, MD3200 Moving a Host to a Different Host Group, Adding a Host to a Host Group

•Right-click the storage array or the Default Group, and select Define→ Host Group from the pop-up menu.

4Type the name of the new host group in Enter new host group name.

5Select the appropriate hosts in the Select hosts to add area.

6Click Add.

NOTE: To remove hosts, select the hosts in the Hosts in group area, and click Remove.

7Click OK.

The host group is added to the storage array.

Adding a Host to a Host Group

You can add a host to an existing host group or a new host group using the Define Host Wizard. For more information, see "Defining a Host" on page 86.

You can also move a host to a different host group. For more information, see "Moving a Host to a Different Host Group" on page 89.

Removing a Host From a Host Group

You can remove a host from the Topology pane on the Mappings tab of the Array Management Window. For more information, see "Removing a Host Group" on page 90.

Moving a Host to a Different Host Group

To move a host to a different host group:

1In the AMW, select the Mappings tab, select the host node in the Topology pane.

2Perform one of these actions:

•Select Mappings→ Move.

•Right-click the host node, and select Move from the pop-up menu. The Move Host dialog is displayed.

3In the Select host group, select the host group to which you want to move the host.

The Move Host Confirmation dialog is displayed.

Configuration: About Your Host

89