Dell E2210C, E1910 Removing the Stand, Wall Mounting Optional, Attaching the Soundbaroptional

to organize all cables as shown above.

Attaching the Soundbar(optional)

CAUTION: Do not use with any device other than Dell Soundbar.

To attach the Soundbar:

1.Working from the back of the monitor, attach Soundbar by aligning the two slots with the two tabs along the bottom of the monitor.

2.Slide the Soundbar to the left until it snaps into place.

3.Connect the Soundbar with the power brick.

4.Plug the power cable of the brick to a nearby power outlet.

5.Insert the lime-green mini stereo plug from the rear of the Soundbar into the computer's audio output jack.

Removing the Stand

NOTE: To prevent scratches on the LCD screen while removing the stand, ensure that the monitor is placed on a clean surface.

To remove the stand:

1.Rotate the stand to allow access to the stand release button.

2.Press and hold the stand release button.

3.Lift the stand up and away from the monitor.

Wall Mounting (Optional)