Dell E198WFP appendix Monitor Specifications

Left side Right side

Monitor Specifications

Power Management Modes

If you have VESA's DPM™ compliance display card or software installed in your PC, the monitor automatically reduces its power consumption when not in use. This is referred to as Power Save Mode. The monitor automatically resumes functioning when the system detects input from the keyboard, mouse or other input devices.The following table shows the power consumption and signaling of this automatic power saving feature:

VESA Modes	Horizontal Sync	Vertical Sync	Video	Power Indicator	Power Consumption
Normal operation	Active	Active	Active	Green	38 W (typical)
Active-off mode	Inactive	Inactive	Blanked	Ambers	Less than 2 W
Switch off	-	-	-	Off	Less than 1 W

NOTE: The OSD only functions in the normal operation mode. One of the following messages appears when the Menu or Plus buttons are pressed when in Active-off mode.

1 : Auto Detect (Analog Input)		1 : Auto Detect (Digital Input)
In Power Save Mode
		In Power Save Mode
Press computer power button	or
		Press computer power button
or any key on keyboard or move mouse
		or any key on keyboard or move mouse

2: Analog Input		3: Digital Input
In Power Save Mode
Press computer power button		In Power Save Mode
	or
or any key on keyboard or move mouse		Press computer power button
		or any key on keyboard or move mouse

Activate the computer and the monitor to gain access to the OSD.

This monitor is ENERGY STAR®-compliant as well as TCO '99/'03 power management compatible.

* Zero power consumption in OFF mode can only be achieved by disconnecting the main cable from the monitor.

Pin Assignments