Setting Up the Monitor:Dell P2211H/P2311H Flat Panel Monitor User's Guide
To remove the stand:
1.Place the monitor on a flat surface.
2.Press and hold the Stand release button.
3.Lift the stand up and away from the monitor.
Wall Mounting (Optional)
(Screw dimension: M4 x 10 mm).
Refer to the instructions that come with the
1.Place the monitor panel on a soft cloth or cushion on stable flat table.
2.Remove the stand
3.Use a screwdriver to remove the four screws securing the plastic cover.
4.Attach the mounting bracket from the wall mounting kit to the LCD.
5.Mount the LCD on the wall by following the instructions that came with the base mounting kit.
NOTE: For use only with UL Listed Wall Mount Bracket with minimum weight/load bearing capacity of 3.10 kg.
Back to Contents Page
file:///S/SSA_Proposal/P2211_P2311/setup.htm[7/13/2011 12:17:55 PM]