5
Power (with power light
indicator)
Use the Power button to turn the monitor on and off.
The Blue LED indicates the monitor is on and fully functional. An amber LED indicates DPMS power save mode.
Using the On-Screen Display (OSD) Menu
Accessing the Menu System
NOTE: If you change the settings and then either proceed to another menu or exit the OSD menu, the monitor automatically saves those changes. The changes are also saved if you change the settings and then wait for the OSD menu to disappear.
1.Press the MENU button to launch the OSD menu and display the main menu.
Main Menu for Analog (VGA) Input
or
Main Menu for Digital
NOTE: AUTO ADJUST is only available when you use the analog (VGA) connector.
2.Press the 
and 
buttons to move between the setting options. As you move from one icon to another, the option name is highlighted. See the following table for a complete list of all the options available for the monitor.
3.Press the 
or 
button once to activate the highlighted option.
4.Press the 
and 
buttons to select the desired parameter.
5.Press 
to enter the slide bar and then use the 
or 
button, according to the indicators on the menu, to make your changes.
6.Press the 
button once to return to the main menu to select another option or press the 
button two or three times to exit from the OSD menu.
Icon | Menu and Submenus | Description |
| Energy Gauge | This meter shows the energy level being consumed by the monitor in real time. When the meter is green, it indicates the mon |
|
| consuming low energy level. When the energy consumed increases, the meter will change to yellow and subsequently red. |