Dell IN2020F, IN2020MF appendix Preset Display Modes, Electrical, Physical Characteristics

Preset Display Modes

IN2020/IN2020M

Display Mode	Horizontal Frequency	Vertical Frequency	Pixel Clock	Sync Polarity (Horizontal/Vertical)
	(kHz)	(Hz)	(MHz)
VGA, 720 x 400	31.469	70.087	28.3	-/+
VGA, 640 x 480	31.469	59.940	25.2	-/-
VGA, 640 x 480	37.500	75.000	31.5	-/-
VESA, 800 x 600	37.879	60.317	40.0	+/+
VESA, 800 x 600	46.875	75.000	49.5	+/+
VESA, 1024 x 768	48.363	60.004	65.0	-/-
VESA, 1024 x 768	60.023	75.029	78.8	+/+
VESA. 1152 x 864	67.500	75.000	108.0	+/+
VESA, 1280 x 1024	64.000	60.000	108.0	+/+
VESA, 1280 x 1024	79.976	75.025	135.0	+/+
VESA, 1600 x 900	55.540	60.000	97.75	+/-

Electrical

Model	IN2020/IN2020M
	Analog RGB, 0.7 Volts +/- 5%, positive polarity at 75 ohm input impedance
Video input signals	Digital DVI-D TMDS, 600mV for each differential line, positive polarity at 50 ohm input
	impedance (for IN2020M)
Synchronization input signals	Separate horizontal and vertical synchronizations, polarity-free TTL level, SOG
	(Composite SYNC on green)
AC input voltage/frequency/current	100 to 240 VAC/50 or 60 Hz + 3 Hz/1.6A (Max.)
Inrush iso surge current	120 V: 30 A (Max.)
	240 V: 60 A (Max.)

Physical Characteristics

Model

Connector type

IN2020/IN2020M

•D-sub: Blue connector

•DVI-D: White connector (for IN2020M only)

Signal cable type

•D-sub: Detachable, Analog, 15 pin, shipped attached to the monitor

•DVI-D: Detachable, DVI-D, Solid pins (optional)

Dimensions (with stand)

Height

Width

Depth

363 mm (14.30 inches)

481 mm (18.95 inches)

152 mm (5.98 inches)

Dimensions (without stand)

Height

288.00 mm (11.34 inches)

Width

481 mm (18.95 inches)

Depth

61 mm (2.38 inches)

Stand dimensions