Dell IN2020/IN2020M Flat Panel Monitor User's Guide
Reset Color Settings Back
NOTE: Demo Mode is only available for video input.
Returns your monitor color settings to the factory default settings.
Press the 
button to go back to or exit the main menu.
Display Settings
Horizontal Position
Vertical Position
Sharpness
Pixel Clock
Phase
Dynamic Contrast
Reset Display Setting
Back
Other Settings
Language
Menu Transparency
Menu Timer
Use the 
and 
buttons to adjust image left and right. Minimum is '0'
Use the 
and 
buttons to adjust image up and down. Minimum is '0'
This feature can make the image look sharper or softer. Use 
or 
to adjust the sharpness from '0' to '100' .
The Phase and Pixel Clock adjustments allow you to adjust your monitor to your preference. These settings are accessed through the main OSD menu, by selecting 'Display Settings'. Use the 
and 
buttons to adjust for best image quality.
If satisfactory results are not obtained using the Phase adjustment, use the Pixel Clock (coarse) adjustment and then use Phase (fine), again.
Allows you to increase the level of contrast to provide sharper and more detailed image quality.
Resets the display settings to the factory default settings.
Press the
button to go back to or exit the main menu.
Language option to set the OSD display to one of 6 languages (English, Espanol, Francais, Deutsch, Simplified Chinese, Japanese).
Allows you to adjust the OSD background from opaque to transparent.
OSD Hold Time: Sets the amount of time the OSD will remain active after the last time you pressed a button.
Use the 
and 
buttons to adjust the slider in 5 second increments, from 5 to 60 seconds.
file:///C/Users/santhosh_v/Desktop/UG_en/operate.htm[3/27/2013 12:21:03 PM]