Dell U2913WM manual Plug and Play Capability

Plug and Play Capability

You can install the monitor in any Plug and Play-compatible system. The monitor automatically provides the computer system with its Extended Display Identification Data (EDID) using Display Data Channel (DDC) protocols so the system can configure itself and optimize the monitor settings. Most monitor installations are automatic; you can select different settings if desired. For more information about changing the monitor settings, see Operating the Monitor.

Universal Serial Bus (USB) Interface

This section gives you information about the USB ports that are available on the left side of your monitor.

NOTE: The USB ports on this monitor are USB 3.0 compliant.

Transfer speed	Data	Power Consumption
	Rate
SuperSpeed	5 Gbps	4.5 W (Max., each port)
Hi-Speed	480 Mbps	2.5 W (Max., each port)
Full speed	12 Mbps	2.5 W (Max., each port)
Low speed	1.5 Mbps	2.5 W (Max., each port)
USB Upstream		USB Downstream
Connector		Connector

Pin Number Signal Name

1	VBUS
2	D-
3	D+
4	GND

Pin Number Signal Name

1	VBUS
2	D-
3	D+
4	GND