Dell U2413 manual Troubleshooting the Card Reader, Problem, Cause, Solution

Page 66

Distorted Sound

Distorted Sound

Unbalanced Sound Output

Low Volume

Computer's sound card is used as the audio source

Other audio source is used

Sound from only one side of Soundbar

Volume is too low

Play some audio content on the computer (i.e. audio CD, or MP3).

Turn the Power/Volume knob on the soundbar clockwise to a higher volume setting. Clean and reseat the audio line-in plug.

Test the soundbar using another audio source (i.e. portable CD player).

Clear any obstructions between the soundbar and the user.

Confirm that the audio line-in plug is completely inserted into the jack of the sound card. Set all Windows volume controls to their midpoints.

Decrease the volume of the audio application.

Turn the Power/Volume knob on the soundbar counter-clockwise to a lower volume setting. Clean and reseat the audio line-in plug.

Troubleshoot the computer's sound card.

Test the Soundbar using another audio source (i.e. portable CD player).

Clear any obstructions between the soundbar and the user.

Confirm that the audio line-in plug is completely inserted into the jack of the audio source. Decrease the volume of the audio source.

Turn the Power/Volume knob on the soundbar counter-clockwise to a lower volume setting. Clean and reseat the audio line-in plug.

Clear any obstructions between the soundbar and the user.

Confirm that the audio line-in plug is completely inserted into the jack of the sound card or audio source. Set all Windows audio balance controls (L-R) to their midpoints.

Clean and reseat the audio line-in plug. Troubleshoot the computer's sound card.

Test the soundbar using another audio source (i.e. portable CD player).

Clear any obstructions between the soundbar and the user.

Turn the Power/Volume knob on the soundbar clockwise to the maximum volume setting. Set all Windows volume controls to their maximum.

Increase the volume of the audio application.

Test the soundbar using another audio source (i.e. portable CD player).

Troubleshooting the Card Reader

CAUTION: Do not remove the device while reading or writing media. Doing so may cause loss of data or malfunction in the media.

Problem

Drive letter is not assigned. (Windows® XP only)

Drive letter is assigned, but the media is not accessible

The media has been ejected during writing or erasing.

Cause

Conflict with network drive letter.

The media needs reformatting.

Displays the error message, "Error copying file or folder."

Displays the error message, "Cannot write folder (folder name) or file (file name)," during writing, or, "Cannot remove folder (folder name) or file(file name),". While erasing, you cannot write or erase in the same folder or file name.

Solution

A. Right-click My Computer on the desktop, and then click Manage. Under Computer Management, click Desk Management.

B. In the list of drives in the right panel, right-click Removable Device and then click Change Drive Letter and Paths.

C. Click Change, and in the drop-down box, specify a drive letter for the Removable Device, choosing one that is not assigned to the mapped network drives.

D. Click OK, then click OK again

Right-click the drive in Explorer and choose Format from the resulting menu.

Reinsert the media and write or erase again.

Format the media for writing or erasing the same folder or file name.

Despite the disappearance of the pop-up window, the media has been ejected while the LED was blinking.

Cannot format or write on the media.

Card reader is not working

Although the pop-up window disappears during writing, if you eject your media while the LED is still blinking, then you cannot complete your action on the media.

Write protect switch is enabled.

USB interface is not working.

Format the media for writing or erasing the same folder or file name.

Verify that the write- protect switch of the media is unlocked.

Check that your monitor is powered On.

Image 66
Contents Dell U2413/U2713H Monitor Dell U2413/U2713H Monitor Users Guide Package Contents About Your MonitorPage Product Features Identifying Parts and Controls Front ViewFront panel controls Label Description Back View Label Back View with monitor stand Description UseSide View Label Description UseBottom View Bottom view without monitor standMonitor Specifications Flat Panel SpecificationsResolution Specifications Preset Display Modes Supported Video ModesModel Connector type Signal cable type U2413 U2713H Electrical SpecificationsPhysical Characteristics Dimensions with standEnvironmental Characteristics Power Management Modes Pin Pin Side of the Connected Signal Cable Number Pin AssignmentsDisplayPort Connector DP in and DP out Mini DisplayPort Connector Pin Number Pin Side of the Connected Signal Cable Plug and Play CapabilityPin Number 9-pin Side of the Connector Universal Serial Bus USB InterfaceTransfer Speed Data Rate Card Reader Specifications Pin Number Pin Side of the ConnectorLCD Monitor Quality and Pixel Policy Slot Number Flash memory cards typeMaintenance Guidelines Cleaning Your MonitorSetting Up the Monitor Attaching the StandConnecting Your Monitor Page Page Page Page Page Connecting the USB 3.0 cable Organizing Your Cables Attaching Dell Soundbar AX510/AY511 Optional Removing the Monitor Stand Wall Mounting Optional Power On the Monitor Operating the MonitorUsing the Front Panel Controls Shortcut key/Preset Modes Brightness/ContrastPower Use the Power key to turn the monitor On and OffPower save mode With power light indicatorUsing the On-Screen Display OSD Menu BackContrast Brightness Icon MenuSubmenus ContrastDisplayPort Color SettingsScan Sources Mini DisplayPortPage Gamma Page Hue SaturationDisplay Settings Use the Display Settings to adjust image SharpnessUniformity Compe nsation Smart Video Enha nce PIP/PBP submenu when PIP/PBP Off Reset DisplaySettings Display InfoPIP/PBP submenu when PIP/PBP On Size PIP ModeOther Settings PositionLanguage Menu TimerPower Save Menu TransparencyPage Page Page OSD Warning Messages DVI-D/DP/Mini DP/HDMI input Page Setting the Maximum Resolution Using Dell Soundbar Using the Tilt, Swivel, and Vertical Extension Tilt, SwivelVertical Extension Rotating the Monitor Adjusting the Rotation Display Settings of Your System Troubleshooting Self-TestBuilt-in Diagnostics Common Problems Common Symptoms What You Experience Possible SolutionsDell Soundbar Problems Product Specific ProblemsUniversal Serial Bus USB Specific Problems Specific Symptoms What You ExperienceSolution Troubleshooting the Card ReaderProblem CauseBack to Contents Appendix Setting Up Your Monitor Setting Up Your Monitor Click Change Display Settings Click Advanced Settings
Related manuals
Manual 71 pages 48.02 Kb

U2413 specifications

The Dell U2713H and U2413 monitors are part of Dell's UltraSharp series, designed specifically for professionals and enthusiasts who require exceptional color accuracy and stunning visuals. Both monitors incorporate advanced technologies that make them stand out in the competitive display market.

The Dell U2713H features a 27-inch IPS panel with a resolution of 2560 x 1440 pixels, delivering breathtaking image clarity and sharpness. With a pixel density of approximately 109 PPI, this monitor provides ample screen real estate for multitasking and detailed work. The U2413, on the other hand, is a 24-inch monitor with a resolution of 1920 x 1200 pixels, making it slightly smaller but still offering excellent visuals. Its aspect ratio of 16:10 allows for a more vertical workspace, which is appreciated by content creators and digital professionals.

Both monitors boast a wide color gamut, covering 99% of the Adobe RGB color space and 100% of the sRGB spectrum. This extensive coverage ensures that colors are vibrant and true to life, making them ideal for activities such as photo editing, graphic design, and video production. The accuracy of these monitors is further enhanced by factory calibration, which guarantees that users experience consistent and precise color reproduction straight out of the box.

Another impressive feature of the U2713H and U2413 is their advanced connectivity options. Both monitors come equipped with DisplayPort, Mini DisplayPort, HDMI, and legacy connections like VGA and DVI, allowing users to connect a variety of devices seamlessly. Additionally, they include USB 3.0 hubs, providing easy access to connect peripherals and transfer data at high speeds.

In terms of ergonomics, both monitors support height, tilt, swivel, and pivot adjustments, enabling users to find the most comfortable viewing position. The anti-glare screen coating minimizes reflections, ensuring that visual quality is maintained even in bright environments.

With their sophisticated blend of features, technologies, and high-performance characteristics, the Dell U2713H and U2413 monitors are exemplary choices for professionals who refuse to compromise on visual quality. They not only enhance productivity but also elevate the overall computing experience by providing stunning, accurate, and immersive visuals.