Harbor Freight Tools 69728 Service Precautions, Setup, Maintenance, Save these instructions

Service Precautions

1.Before service, maintenance, or cleaning:

a.Unplug all devices from the generator.

b.Turn the engine switch to its “OFF” position.

c.Allow the engine to completely cool.

d.Then, remove the spark plug cap from the spark plug.

2.Keep all safety guards in place and in proper working order. Safety guards include muffler, air cleaner, mechanical guards,

and heat shields, among other guards.

7.Have the equipment serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the equipment is maintained. Do not attempt any service or maintenance procedures not explained in this manual or any procedures that you are uncertain about your ability to perform safely or correctly.

8.Store equipment out of the reach of children.

9.Follow scheduled engine and equipment maintenance.

Safety

3.Keep all electrical equipment clean and dry. Replace any wiring where the insulation is cracked, cut, abraded, or otherwise degraded. Replace terminals that are worn, discolored, or corroded. Keep terminals clean and tight.

4.Do not alter or adjust any part of the equipment or its engine that is sealed by the manufacturer or distributor. Only a qualified service technician may adjust parts that may increase or decrease governed engine speed.

5.Wear ANSI-approved safety goggles, heavy-duty work gloves, and dust mask/respirator during service.

6.Maintain labels and nameplates on the equipment. These carry important information. If unreadable or missing, contact Harbor Freight Tools for a replacement.

Refueling:

1.Do not smoke, or allow sparks, flames, or other sources of ignition around the equipment, especially when refuelling.

2.Do not refill the fuel tank while the engine is running or hot.

3.To prevent fuel leakage and fire hazard, Do not overfill with fuel. Fill with fuel according to the Fuel Level information below the Specification chart for your model.

4.Do not fill fuel tank to the top. Leave a little room for the fuel to expand as needed.

5.Refuel in a well-ventilated area only.

6.Wipe up any spilled fuel and allow excess to evaporate before starting engine. To prevent fire, do not start the engine while the smell of fuel hangs in the air.

Setup

Save these instructions.

Operation

Maintenance

Item 69728 / 69729	For Pump technical questions, please call 1-800-444-3353.	Page 5
	For Engine technical questions, please call 1-800-520-0882.