Harbor Freight Tools 69728 Table of Contents, Instructions Pertaining to a Risk of Fire, y fet Sa

y fet Sa

Table of Contents

Safety	2	Maintenance	14
Setup	6	Parts List and Diagram	20
Specifications	6	Warranty	23
Operation	8

p Setu

ratiepO

ec

WARNING SYMBOLS AND DEFINITIONS

This is the safety alert symbol. It is used to alert you to potential personal injury hazards.

Obey all safety messages that follow this symbol to avoid possible injury or death.

Indicates a hazardous situation which, if not avoided,

will result in death or serious injury.

Indicates a hazardous situation which, if not avoided,

could result in death or serious injury.

Indicates a hazardous situation which, if not avoided,

could result in minor or moderate injury.

Addresses practices not related to personal injury.

IMPORTANT SAFETY INSTRUCTIONS

Instructions Pertaining to a Risk of Fire,

Electric Shock, or Injury to Persons

WARNING – When using tools, basic precautions should always be followed, including the following:

Set up Precautions

Maintenan

1.Gasoline fuel and fumes are flammable, and potentially explosive. Use proper fuel storage and handling procedures. Do not store fuel or other flammable materials nearby.

2.Have multiple ABC class fire extinguishers nearby.

3.Operation of this equipment may create sparks that can start fires around dry vegetation. A spark arrestor may be required. The operator should contact local fire agencies for laws or regulations relating to fire prevention requirements.

4.Set up and use only on a flat, level, well‑ventilated surface.

5.All connections and conduits from the Generator to the load must only be installed by trained and licensed electricians, and in compliance with all relevant local, state, and federal electrical codes and standards, and other regulations where applicable.

6.Connections for standby power to a building electrical system must be made by a qualified electrician. The connection must isolate the generator power from utility power, and must comply with all applicable laws and electrical codes.

7.Wear ANSI-approved safety goggles, heavy-duty work gloves, and dust mask/respirator during set up.

Page 2	For Pump technical questions, please call 1-800-444-3353.	Item 69728 / 69729
	For Engine technical questions, please call 1-800-520-0882.