Datacard Group CP40 manual Site requirements, Electrical requirements

Page 30

Page 27

Site requirements

Operating environment

• Relative humidity: 20% to 80% non-condensing

• Temperature: 60° F to 95° F (15° C to 35° C)

Electrical requirements

• The external power supply is rated at 100-240 VAC, 50-60 Hz, 1.8 amp. (It adjusts to any power within this range.)

• Single phase, 3-wire, grounded receptacle only.

Physical requirements

• The printer weighs less than 9 pounds (4kg). The weight depends on the supplies and options installed.

•Printer dimensions are 16.5 inches (419 mm) long, and 7.8

inches (198 mm) wide. The printer is 9 inches (229 mm) high.

•The clearances required are 1 inch (25mm) at the back, 2 inches (51 mm) on the left side, and 10.5 inches (267 mm) above the printer latch to open the cover.

•Do not use the printer in a dirty environment. Do not use the printer in a closed compartment. Do not block air flow around the printer.

Page 29 Page 31
Image 30
Page 29 Page 31
Contents CP40 Printer Guide Information resources for the CP40 Card Printer Contents About the printer Outside of the printerPage Inside of the printer Features and options Loading cards Tips Handling cardsPage Loading print ribbon Tips Handling print ribbonPage Check the PC connection Power on the printer Printer does not have a power switchStatus light Status Light Description MeaningStatus Light Description Meaning LCD panel Page Opening Properties or Printing Preferences To open the Printer Toolbox, choose Open Printer Toolbox Open the Printer Toolbox Page Cleaning the printer Cleaning tips Getting the most out of your printer Page Printer supplies Color print ribbonCleaning supplies Color Part number Part NumberTroubleshooting What is the problem? Try thisWhat is the problem? Site requirements Electrical requirementsLegal Notices FCC Liability statementSeptember 553772-201 Rev. J
Top Page Image Contents