Display Mode Keys
FLO – SCI – ENG Press to select the display mode.
FLOATING: Floating Point | Ex. 123456 |
SCI: Scientific Exponential | Ex. 1.2345606 |
ENG: Engineering Exponential | Ex. 123.45604 |
Display Range
Floating Point : | 10 | |
Scientific: | 10 | |
Engineering | Exponential 10 | |
Mantissa: | Less than 100 | |
Decimal Point
Press MODE, then press DRG to set in DEG mode.
Press INV and press FIX then a number from 0 to 9 to set the number of numbers to the right of the decimal point. Press INV and press FIX then . (decimal point) to reset the Decimal point location.
DRG: Degree/Radian/Gradient Mode Key.
Press to change the angle units.
DRG> : Angle Conversion key.
Used with INV key to convert angle values to different units.
200GRAD= 180 degrees = Pi RAD
Basic Functions
+, – , x, ÷ key s
Press keys as written for basic functions.
%key
Press for percentage calculations,
(…)Open/Close parenthesis keys
Press for up to 6 levels of parenthesis when performing complex calculations.
Up to 15 consecutive open parenthesis may be used at one time.
Notes:Open and close parenthesis must be used together, If only one is used, the calculation will be incorrect.
Fractions
Accepts fractions and calculates with both mixed and improper fractions. Answers are given in mixed fractions.
ab/c Fraction key: Press to enter fractions as shown:
Improper fractions A/B: |
| |
Numerator | ab/c Denominator | |
Ex. 6 ab/c | 7 = 6/7 | <<6_ 7>> is displayed |
Up to 6 digits may be used for the numerator, 3 dig- its for the denominator.
6 | 7 |