Diamond Systems Low-Power PC/104 CPU Board With ZFx86 Processor Flash Disk Programmer Board

Page 33

13.FLASH DISK PROGRAMMER BOARD

The Flash Disk Programmer Board accessory model no. ACC-IDEEXTmay be used for several purposes. Its primary purpose is to enable the simultaneous connection of both a flashdisk module and a standard IDE hard drive or CD-ROM drive to allow file transfers to/from the flashdisk. This operation is normally done at system setup. The board can also be used to enable the simultaneous connection of two drives to the CPU.

J1 connects to the IDE connector on Prometheus-LC with a 44-pin ribbon cable (Diamond Systems’ part no. 698004). Both 40-pin .1” spacing (J4) and 44-pin 2mm spacing (J3) headers are provided for the external hard drive or CD-ROM drive. A dedicated connector (J2) is provided for the flashdisk module. Any two devices may be connected simultaneously using this board with proper master / slave jumper configurations on the devices.

The Flash Disk Programmer Board comes with a 44-wire cable no. (DSC no. 698004) and a 40- wire cable no. (DSC no. C-40-18) for connection to external drives. The flashdisk module is sold separately.

The 44-pin connector (J1, J2, and J3) and mating cable carry power, but the 40-pin connector (J4) and mating cable do not. J5 and J6 on the accessory board may be used to provide power to a 44-pin device attached to the board when the board is attached to a PC via a 40-pin cable. These headers are compatible with the floppy drive power connector on a standard PC internal power cable.

ACC-IDEEXTFlashDisk Programmer Board

Prometheus-LC CPU User Manual V1.0

Page 33

Page 32 Page 34
Image 33
Page 32 Page 34
Contents PROMETHEUS-LC Table of Contents 12.2 12.112.3 12.4Description Features System FeaturesProcessor Section J4 Not present PROMETHEUS-LC Board DrawingO Headers Main I/O Connector J3Cable a Cable BCOM1 COM4 Connector Part NumbersInput Power J11 USB J5 Output Power J12Watchdog/Failsafe Features J6 Auxiliary Serial Port Connector J15IDE Drive J8 Floppy Drive J7J2 PC/104 16-bit bus connector J1 PC/104 8-bit bus connector PC/104 Bus ConnectorsSystem Configuration J10 Jumper ConfigurationWatchdog Timer & System Recovery J6 System Features System ResourcesCPU Chip Selects Console Redirection to a Serial Port Watchdog Timer Backup Battery Failsafe Mode / Bios RecoverySystem Reset Flash MemoryBios Settings Bios FeaturesGround Bios Download / RecoveryInitial Setup DISK-ON-BOARD Flash File StorageOperating System Formatting Life Cycle Management and Calculations Known LimitationsSystem I/O Serial PortsParallel Port Installing an OS From a Floppy Drive onto a Flashdisk Module Installing an OS from a Hard Disk onto a Flashdisk Module Using the Flashdisk with Another IDE Drive ConfigurationPower Supply Flashdisk ModuleDescription 12. I/O Panel BoardPanel Board Top Side / External Use I/O Connectors Panel Board I/O ConnectorsLocation Type Description Panel Board HardwareJ12 pinout to/from DC/DC power supply Panel Board Power ConnectionsJ3 Pinout J5 USB J9 Pinout InstallationFlash Disk Programmer Board 14.I/O Cables Photo No Cable No DescriptionCable Kit C-PRZ-KIT VGA Accessory Board PL5 pin no PL5 Signal J25 pin no J25 SignalPL5 pin no DB15F pin no Signal Connector on Board Manufacturer Manufacturer Part No Mounting PROMETHEUS-LC on a BaseboardWebsite information Page 17.PC/104 Mechanical Drawing

Low-Power PC/104 CPU Board With ZFx86 Processor, PR-Z16-LC-ST specifications

The Diamond Systems Low-Power PC/104 CPU Board featuring the ZFx86 Processor, specifically the PR-Z16-LC-ST model, represents a significant advancement in embedded computing technology. This CPU board is designed to deliver robust performance while maintaining low power consumption, making it ideal for a wide array of industrial and embedded applications.

One of the standout features of the PR-Z16-LC-ST board is its ZFx86 Processor. This processor family is built with a focus on energy efficiency and low thermal output, which is crucial for applications where heat dissipation can be a challenge. The ZFx86 provides an excellent balance between processing power and energy consumption, featuring a 16-bit instruction set that facilitates compatibility with many existing software applications.

This board supports a variety of operating environments, including DOS, Linux, and Windows, ensuring versatility for developers. Its design includes a compact PC/104 form factor, which allows for streamlined stacking of multiple boards. This modularity is beneficial for system integrators looking to create customized solutions with limited space.

In terms of connectivity, the PR-Z16-LC-ST is equipped with a wide range of I/O ports. This includes digital and analog inputs and outputs, serial communication ports, and support for various peripheral devices. Such features make it a suitable choice for tasks such as data acquisition, control systems, and automation processes.

Additionally, the Diamond Systems board is designed with an onboard memory expansion capability, allowing users to enhance performance based on specific application needs. The support for both DRAM and flash memory options provides flexibility in memory configuration.

The board also emphasizes reliability and longevity, with rugged construction suitable for harsh environments. This durability is essential for applications in sectors such as transportation, telecommunications, and factory automation, where systems must withstand extreme conditions.

In summary, the Diamond Systems PR-Z16-LC-ST Low-Power PC/104 CPU Board with ZFx86 Processor combines efficiency with a robust feature set. Its low power consumption, modular design, and extensive connectivity options make it an attractive solution for developers in the embedded computing space seeking reliable performance in compact configurations.
Top Page Image Contents