Diamond Systems Low-Power PC/104 CPU Board With ZFx86 Processor, PR-Z16-LC-ST user manual

Page 25

10.NOTES ON OPERATING SYSTEMS AND BOOTING PROCEDURES

10.1Installing an OS From a Floppy Drive onto a Flashdisk Module

1.Make sure the flashdisk module jumper is configured for Master.

2.Install the flashdisk module onto the CPU. See installation instructions on page 27.

3.Power up your system and enter the BIOS during startup.

4.Go to the Boot screen and change the boot sequence to boot from floppy disk.

5.Save the new settings and exit the BIOS. The system will now boot to floppy.

6.If necessary, run FDISK and perform the following steps:

a.Remove all partitions on the flashdisk module.

b.Create a primary DOS partition on the flashdisk module.

c.Make the DOS partition the active partition.

d.Save your changes and exit.

7.Boot the system again from the floppy disk.

8.Format the flashdisk module using FORMAT C: /S.

9.Copy the operating system files and any other needed files to the flashdisk module.

10.Reboot your system and enter the BIOS during startup.

11.Go to the Boot screen and change the boot sequence to boot from hard disk.

12.Save the new settings and exit the BIOS.

13.Power down the system and disconnect the floppy drive.

14.The system is now able to boot from the flashdisk module.

Prometheus-LC CPU User Manual V1.0

Page 25

Page 24 Page 26
Image 25
Page 24 Page 26
Contents PROMETHEUS-LC Table of Contents 12.2 12.112.3 12.4Description System Features FeaturesProcessor Section J4 Not present PROMETHEUS-LC Board DrawingO Headers Main I/O Connector J3Cable a Cable BCOM1 COM4 Connector Part NumbersInput Power J11 USB J5 Output Power J12Watchdog/Failsafe Features J6 Auxiliary Serial Port Connector J15IDE Drive J8 Floppy Drive J7J2 PC/104 16-bit bus connector J1 PC/104 8-bit bus connector PC/104 Bus ConnectorsSystem Configuration J10 Jumper ConfigurationWatchdog Timer & System Recovery J6 System Resources System FeaturesCPU Chip Selects Console Redirection to a Serial Port Watchdog Timer Backup Battery Failsafe Mode / Bios RecoverySystem Reset Flash MemoryBios Settings Bios FeaturesGround Bios Download / RecoveryDISK-ON-BOARD Flash File Storage Initial SetupOperating System Formatting Life Cycle Management and Calculations Known LimitationsSerial Ports System I/OParallel Port Installing an OS From a Floppy Drive onto a Flashdisk Module Installing an OS from a Hard Disk onto a Flashdisk Module Using the Flashdisk with Another IDE Drive ConfigurationPower Supply Flashdisk ModuleDescription 12. I/O Panel BoardPanel Board Top Side / External Use I/O Connectors Panel Board I/O ConnectorsLocation Type Description Panel Board HardwareJ12 pinout to/from DC/DC power supply Panel Board Power ConnectionsJ3 Pinout J5 USB J9 Pinout InstallationFlash Disk Programmer Board Photo No Cable No Description 14.I/O CablesCable Kit C-PRZ-KIT PL5 pin no PL5 Signal J25 pin no J25 Signal VGA Accessory BoardPL5 pin no DB15F pin no Signal Mounting PROMETHEUS-LC on a Baseboard Connector on Board Manufacturer Manufacturer Part NoWebsite information Page 17.PC/104 Mechanical Drawing

Low-Power PC/104 CPU Board With ZFx86 Processor, PR-Z16-LC-ST specifications

The Diamond Systems Low-Power PC/104 CPU Board featuring the ZFx86 Processor, specifically the PR-Z16-LC-ST model, represents a significant advancement in embedded computing technology. This CPU board is designed to deliver robust performance while maintaining low power consumption, making it ideal for a wide array of industrial and embedded applications.

One of the standout features of the PR-Z16-LC-ST board is its ZFx86 Processor. This processor family is built with a focus on energy efficiency and low thermal output, which is crucial for applications where heat dissipation can be a challenge. The ZFx86 provides an excellent balance between processing power and energy consumption, featuring a 16-bit instruction set that facilitates compatibility with many existing software applications.

This board supports a variety of operating environments, including DOS, Linux, and Windows, ensuring versatility for developers. Its design includes a compact PC/104 form factor, which allows for streamlined stacking of multiple boards. This modularity is beneficial for system integrators looking to create customized solutions with limited space.

In terms of connectivity, the PR-Z16-LC-ST is equipped with a wide range of I/O ports. This includes digital and analog inputs and outputs, serial communication ports, and support for various peripheral devices. Such features make it a suitable choice for tasks such as data acquisition, control systems, and automation processes.

Additionally, the Diamond Systems board is designed with an onboard memory expansion capability, allowing users to enhance performance based on specific application needs. The support for both DRAM and flash memory options provides flexibility in memory configuration.

The board also emphasizes reliability and longevity, with rugged construction suitable for harsh environments. This durability is essential for applications in sectors such as transportation, telecommunications, and factory automation, where systems must withstand extreme conditions.

In summary, the Diamond Systems PR-Z16-LC-ST Low-Power PC/104 CPU Board with ZFx86 Processor combines efficiency with a robust feature set. Its low power consumption, modular design, and extensive connectivity options make it an attractive solution for developers in the embedded computing space seeking reliable performance in compact configurations.
Top Page Image Contents