Toshiba RAV-SP180UT-UL „Installation space, „Selection of installation place, Advice, unit in mm

4-way Air Discharge Cassette Type Installation Manual

„Installation space

Secure the specified space in the figure for installation and servicing.

Model RAV-	A in (mm)
SP180, SP240 Type	10.7” (271) or more
SP300, SP360, SP420 Type	13.1” (334) or more

		or more
(15)0.6” (0.6)15moreor			39.4” (1000) or more
				1000 (39.4) or more
						or more
	A
						391000.4” (1000)(39.4) or more
					Obstaclele

„Selection of installation place

unit : in (mm)

7.9” (200) 200 (7.9)

Check p	(200)
Check port
17.7” x 17.7”
450×450	(7.9)
(17.7×17.7)	9”
(450 x 450)
	200
	7.

Check port

Check port

17.7” x 17.7” 450×450

(450 x 450) (17.7×17.7)

CheckCheckportportmustmustbe locatedbe locatedon on the theFreshFreshairairinletinletboxboxside,si if it is installed. if it is installed

In case of continued operation of the indoor unit under high-humidity conditions as described below, dew may condense and water may drop.

Especially, high-humidity atmosphere (dew point temperature : 73.4°F (23°C) or more) may generate dew inside the ceiling.

1.Unit is installed inside the ceiling with slated roof.

2.Unit is installed at a location using inside of the ceiling as fresh air take-in path.

3.Kitchen

Advice

•Set a service check opening panel at right side of the unit (size: 17.7" × 17.7" (450 × 450mm) or more) for piping, maintenance, and servicing.

•If installing a unit at such place, put insulating material (glass wool, etc.) additionally on all the positions of the indoor unit which come to contact with high-humidity atmosphere.

REQUIREMENT

When the humidity inside the ceiling seems to be higher than 80%, attach a heat insulator to the side (top) surface of the indoor unit. (Use a heat insulator that is 0.4" (10 mm) or more thick.)

EN

– 6 – 6-EN