Installation Manual |
8 APPLICABLE CONTROLS
REQUIREMENT
•When you use this air conditioner for the first time, it takes approx. 5 minutes until the remote control becomes available after
<When power is turned on for the first time after installation>
It takes approx. 5 minutes until the remote control becomes available.
|
|
|
|
|
|
| Approx. 5 minutes | |||
|
|
|
|
|
|
| ||||
Power |
|
| “SETTING” |
|
| “SETTING” |
|
| Remote | |
|
|
|
|
|
| |||||
on |
|
| flashes |
|
| goes out |
|
| control is | |
|
|
|
|
|
| |||||
|
|
|
|
|
|
|
|
|
| available |
|
|
|
|
|
|
|
|
|
|
|
<When power is turned on for the second (or later) time>
It takes approx. 1 minute until the remote control becomes available.
|
|
|
|
|
|
|
| Approx. 1 minutes | |||
|
|
|
|
|
|
|
| ||||
Power |
|
| “SETTING” |
|
| “SETTING” |
|
| Remote | ||
|
|
|
|
|
| ||||||
on |
|
|
| flashes |
|
| goes out |
|
| control is | |
|
|
|
|
|
|
| |||||
|
|
|
|
|
|
|
|
|
|
| available |
|
|
|
|
|
|
|
|
|
|
|
|
•Normal settings were made as factory default. Change the indoor unit settings as required.
•Use the wired remote control to change the settings.
*The settings cannot be changed using the wireless remote control, sub remote control, or
Changing applicable control setting
Basic procedure for changing settings
Change the settings while the air conditioner is not working.
(Be sure to stop the air conditioner before making settings.)
1
3
4 |
|
|
6 |
|
|
1 | 5 | 2 |
Procedure 1
Push button and temp. setup button simultaneously for at least 4 seconds.
After a while, the display flashes as shown in the figure. Confirm that the CODE No. is [01].
•If the CODE No. is not [01], push button to erase the display content, and repeat the procedure from the beginning.
(No operation of the remote control is accepted for a while after button is pushed.)
(* Display content varies with
the indoor unit model.)
Procedure 2
Each time you push button, indoor unit numbers in the control group change cyclically. Select the indoor unit you want to change settings for.
The fan of the selected unit runs and the louvers start swinging. You can confirm the indoor unit for which you want to change settings.
EN |
– 22 – |