Installation Manual |
Swing mode
1.Push for at least four seconds when the air conditioner is not working.
flashes.
Indicates CODE No. “F0.”
2.Select an indoor unit to be set by pushing (left side of the button).
Each time you push the button, unit numbers change as follows:
| UNIT No. |
|
| UNIT No. |
|
| UNIT No. |
| ||||
| Not | UNIT No. |
| |||||||||
|
|
|
|
|
|
| ||||||
|
| display |
|
|
|
|
|
| ||||
|
|
|
|
|
|
|
|
The fan of the selected unit runs and the louvers start swinging.
3.Select a swing mode by pushing TIME buttons.
Swing setup code
Swing setup code | Swing of louvers | |
|
| |
0001 | Standard swing | |
(Factory default) | ||
| ||
0002 | Dual swing | |
|
| |
0003 | Cycle swing | |
|
|
CAUTION
Do not set the swing setup code to “0000”. (This setting may cause a failure of the louvers.)
•About “Dual swing”
“Dual” means that louvers 01 and 03 are directed and swing in one direction and louvers 02 and 04 are directed and swing in the opposite direction. (When louvers 01 and 03 are directed downward, louvers 02 and 04 are directed upward.)
•About “Cycle swing”
The four louvers swing independently at respective timings.
03
Refrigerant pipe
0402
Drain pipe
01
4.Push button.
5.Push button to complete the setting.
– 25 – |