2 | Table of Contents |
System 4400 High Performance Loudspeakers
Table of Contents
2Unpacking the Speakers
2Attaching the Grilles
3What’s THX?
3 Individual Component Descriptions
3Model 4400 LR Front Channel Speakers
4Acoustic Controls
4Model 4400 C Center Channel Speaker
4Models 4400 SR Surround Speakers
4 Placement
4Home Theater
4Surround Effects and Speaker Locations
47.1 Channel Systems
6Stereo Systems
6Connecting Your System
8System Setup
8Bass Management
8Operation of the Rear Panel Controls on the LCR Speakers
8Dipole/Bipole Operation of the SR Speakers
9Setting Levels
9Mounting
10Care and Feeding of Your Speakers
10Specifications
System 4400 THX Select
High Performance Loudspeaker Components
Thank you for choosing Atlantic Technology products. Your new speaker components are
Unpacking the Speakers
Use care when unpacking the speakers. Since the grilles are packed off the speakers, be particularly careful of the driver elements as you unpack and move the speakers.Remember to keep the original boxes and packing mate- rial, in the unlikely event the speakers need servicing, or if you move.
Attaching the Grilles
For Future Reference
Record the serial number and date of purchase for each speaker here. The serial number is found on the speaker terminal panel on the back of the enclosure.
Serial Number
Serial Number
Serial Number
Date of Purchase
The contents of this manual are Copyright © 2009 by Atlantic Technology International, Corp.,and may not be duplicated or reproduced by any means,whether physical,electronic or otherwise without prior written consent from Atlantic Technology International, Corp.
Atlantic Technology and theAtlantic Technology logo are registered trademarks of Atlantic Technology International, Corp.
Specifications are those in effect at the time of printing.Atlantic Technology International, Corp. reserves the right to change specifications or designs at any time without notice without obligation to modify existing units.
The included metal grilles are held to the front of the enclosures with pow- erful neodymium magnets. There are depressions on the back of the grille that the magnets fit into.Once the speakers are in their final position,remove the grille from its protective plastic bag and carefully position it over the magnets on the baffle. Move them together slowly and when you get close enough, the magnets will draw the grille in and hold it tight. Be careful not to get your fingers caught between the grille and the cabinet.
NOTE: You will notice a threaded insert in the bottom of the LR sat- ellites. This is for bolting the satellites to speaker stands that utilize a through hole in the middle of the stand’s top plate. Use a 1/4” x 20 bolt to secure the LR to the stand.