Citizen Systems CT-S280 user manual

Page 32

5.Returning to the memory switch select mode

When the setting of the desired content is completed, open the paper cover and then close the paper cover. This allows the printer to print the setting of the changed memory switch.

6.Saving the setting and exiting the memory switch setting mode

Press the FEED switch short to move to “Write/Factory Setting”. Then press and hold the FEED switch. The printer prints the content of new setting and exits the memory switch setting mode to return to the normal standby state.

*Unless saving the setting is executed, the changed setting cannot be enabled.

7.Initializing the memory switch

When you want to return the memory switch setting to the initial state, go to “Write/Factory Setting” in the above procedure. Here, open the paper cover and press and hold the FEED switch till buzzer sounds. This allows the printer to return to the initial state.

*All the memory switches settings are returned to the factory set values.

— 28 —

Image 32
Contents Line Thermal Printer Weee Mark Declaration of Conformity Sicherheitshinweis General Precautions Safety Precautions ... Which should be Strictly Observed Precautions on Printer Installation Gas explosion could result Precautions in Handling the Printer May result in poor print quality Daily Maintenance Table of Contents Features General OutlineUnpacking Model ClassificationBasic Specifications SpecificationsExplanation of Printer Parts Printer AppearanceOperation Panel Paper Cover Inside Other Built-in FunctionsConnecting the AC Adapter and AC Power Cord PreparationConnecting Interface Cables Installing the Printer Setting DIP Switch OFFAdjusting the Paper Near-end Sensor Maintenance and Troubleshooting Setting/Replacing Paper RollsCleaning the Print Head Removing Jammed PaperSelf-printing Hexadecimal Dump PrintingError Indication Power LED Error LEDExternal Views and Dimensions OtherPrinting Paper Paper Type Product NameManual Setting of Memory Switch Switch No Setting OFFManual Setting of Memory Switch Memory SW