Citizen Systems CT-S280 user manual Installing the Printer

Page 21

3.3 Installing the Printer

The printer can be installed horizontally or on the wall.

At the time of shipment, the printer is set for horizontal installation. To install the printer on the wall, the following adjustments are required.

CAUTION!

●No screw for wall mounting is provided. Check the structure and strength of the wall

(plaster board or stronger one) and prepare two appropriate screws (round-head wood screws of 3.1φ, 16 mm or more). And fix the printer by tightening the screws in accordance with the specified dimensions.

Horizontal position

Wall mounting

3.5 2.4

n3	n5.6
	106
50.5
	56

170

Hooks for wall mounting

— 17 —

Image 21

Contents Line Thermal Printer Weee Mark Declaration of Conformity Sicherheitshinweis General Precautions Safety Precautions ... Which should be Strictly Observed Precautions on Printer Installation Gas explosion could result Precautions in Handling the Printer May result in poor print quality Daily Maintenance Table of Contents General Outline FeaturesModel Classification UnpackingSpecifications Basic SpecificationsPrinter Appearance Explanation of Printer PartsOperation Panel Other Built-in Functions Paper Cover InsidePreparation Connecting the AC Adapter and AC Power CordConnecting Interface Cables Installing the Printer OFF Setting DIP SwitchAdjusting the Paper Near-end Sensor Setting/Replacing Paper Rolls Maintenance and TroubleshootingRemoving Jammed Paper Cleaning the Print HeadHexadecimal Dump Printing Self-printingPower LED Error LED Error IndicationOther External Views and DimensionsPaper Type Product Name Printing PaperSwitch No Setting OFF Manual Setting of Memory SwitchManual Setting of Memory Switch Memory SW