Citizen Systems CT-S280 user manual Manual Setting of Memory Switch Memory SW

Page 31

Manual Setting of Memory Switch (Memory SW)

The memory switch can be selected, changed, or written by the combination of three actions: pressing the FEED switch, pressing and holding the FEED switch, and opening or closing the paper cover.

1.Entering memory switch setting mode.

Set paper to the printer and keep the printer cover open. With the FEED switch pressed and held, turn the printer power on, and then press the FEED switch twice. Close the cover. If the current settings of the memory switch etc. are printed, the printer is now in the memory switch setting mode.

Memory SW (1) 00000000

0:

OFF state

1:

ON state

2.Selecting memory switch

When the FEED switch is pressed short (within 2 seconds), printing occurs in the order of “Memory SW1” “Memory SW2” “Memory SW3” “Write/Factory Setting” “Memory SW1” ...... repeatedly. When the memory switch you want to change is reached, press and hold the FEED switch (for more than 2 seconds).

3.Selecting each switch item

There are eight setting items for each switch. Press and hold the FEED switch for long, the printer goes to the next item and prints the current setting of the item. Repeat pressing and holding till the item you want to change setting is reached.

Power ON notify setting (Valid

)

OFF state: ERROR LED OFF

ON state: ERROR LED ON

4.Changing the setting

When the item you want to change is reached, press the FEED switch short. The changed set value is printed. (To return to the previous setting press the FEED switch short). When you press the FEED switch long, the set value is accepted and then the printer goes to the next setting item.

— 27 —

Image 31
Contents Line Thermal Printer Weee Mark Declaration of Conformity Sicherheitshinweis General Precautions Safety Precautions ... Which should be Strictly Observed Precautions on Printer Installation Gas explosion could result Precautions in Handling the Printer May result in poor print quality Daily Maintenance Table of Contents General Outline FeaturesModel Classification UnpackingSpecifications Basic SpecificationsPrinter Appearance Explanation of Printer PartsOperation Panel Other Built-in Functions Paper Cover InsidePreparation Connecting the AC Adapter and AC Power CordConnecting Interface Cables Installing the Printer OFF Setting DIP SwitchAdjusting the Paper Near-end Sensor Setting/Replacing Paper Rolls Maintenance and TroubleshootingRemoving Jammed Paper Cleaning the Print HeadHexadecimal Dump Printing Self-printingPower LED Error LED Error IndicationOther External Views and DimensionsPaper Type Product Name Printing PaperSwitch No Setting OFF Manual Setting of Memory SwitchManual Setting of Memory Switch Memory SW