Citizen Systems CT-S280 user manual Adjusting the Paper Near-end Sensor

Page 23

3.5 Adjusting the Paper Near-end Sensor

1.Push in the paper near-end sensor unit.

2.Move the paper near-end sensor unit to the right and left while pushing it. The position to be set varies in accordance with the setting of the printer, horizontal or wall mounting, or the diameter of the paper roll as shown in the following figure.

Sensor Position

Installation Method

Paper Roll External Diameter (mm)

1

 

φ22

2

Horizontal

φ24

3

 

φ27

4

 

φ27

5

Wall mounting

φ24

6

 

φ22

CAUTION!

Paper remainder (outside diameter of roll) differs by the type of paper roll used.

The external diameter of the paper roll is only for reference.

Recommended outer diameter of paper roll core is φ18. If, however, using a paper roll with a diameter of φ22 is unavoidable, adjustments to “1” for horizontal positioning and “6” for wall mounting cannot be used.

45

1 2 3

6

— 19 —

Image 23
Contents Line Thermal Printer Weee Mark Declaration of Conformity Sicherheitshinweis General Precautions Safety Precautions ... Which should be Strictly Observed Precautions on Printer Installation Gas explosion could result Precautions in Handling the Printer May result in poor print quality Daily Maintenance Table of Contents General Outline FeaturesModel Classification UnpackingSpecifications Basic SpecificationsPrinter Appearance Explanation of Printer PartsOperation Panel Other Built-in Functions Paper Cover InsidePreparation Connecting the AC Adapter and AC Power CordConnecting Interface Cables Installing the Printer OFF Setting DIP SwitchAdjusting the Paper Near-end Sensor Setting/Replacing Paper Rolls Maintenance and TroubleshootingRemoving Jammed Paper Cleaning the Print HeadHexadecimal Dump Printing Self-printingPower LED Error LED Error IndicationOther External Views and DimensionsPaper Type Product Name Printing PaperSwitch No Setting OFF Manual Setting of Memory SwitchManual Setting of Memory Switch Memory SW