Citizen Systems CLP-7201e user manual Part Names and Functions, Front view

Chapter 1 Setup

2 Part Names and Functions

2 Part Names and Functions

Front view

(1)Cover

Opens to allow loading of the media and ribbon.

(2)Control panel

To set the printer configuration settings. (See Chapter 2.)

(3)Ribbon holder

To attach the ribbon. (See Chapter 3.)

(4)Ribbon winder

To wind the ribbon after printing. (See Chapter 3.)

(5)Roll holder

Holds the roll of media.

(6)Roll guide

Guides the roll of media. This is adjusted according to the width of the media. (See Chapter 3.)

(7)Media holder

Holds the roll holder. (See Chapter 3.)

(8)Open lever

To swing the printhead out of the way when loading the media or cleaning the printhead. (See Chapter 3.)

(9)Printhead pressure adjustment knob (See Chapter 4.)

(10)Open guide

Holds down the media. The adjustable, movable media sensor inside (available for the model CLP-7201e) detects the media position. (See Chapter 3.)

(11)Open guide lever

Pressing this opens the open guide to replace the media. (See Chapter 3.)

(12)Front sensors

Detect the label or tag position. (See Chapter 3.)

(13)Offset check window

Allows you to check the optimum position of the printhead. (See Chapter 4.)

15