Before Operation
General Precautions
1.Prior to operation, read the safety instructions carefully and observe them.
2.Do not drop or put foreign matter such as clips and pins into the printer. This may cause problems.
3.Be careful when moving or carrying the printer. Dropping the printer may cause injury or property damage.
4.Make sure if you open the top cover, it is opened all the way. If only partially open, the cover could slam shut, possibly causing injury.
5.When the cover is open, be careful of the corners of the cover. They could cause injury.
6.Do not open the printer during printing.
7.When cleaning the surface of the printer case, do not use the cloth that is soaked in thinner, trichloroethylene, benzine, ketone or similar chemicals.
8.Do not use the printer where there is a lot of oil, iron particles, or dust.
9.Do not spill liquids or spray insecticide on the printer.
10.Do not jolt or impact to the printer by stepping on, dropping or hitting the printer.
11.Operate the control panel properly. A careless, rough handling may cause problems or malfunction. Do not use such
12.Be careful of the edges of the plates so injury or property damage is possible.
13.If a problem occurs during printing, stop the printer immediately and unplug the power cord from the outlet.
14.When printer trouble occurs, do not try to dissemble it. Instead, consult our service personnel.
7