LED/optional Lamp Flashing |
|
Press and hold the LED Flash | key to activate the LED |
flasher function. If you have plugged a lamp into the clock, it will also flash when the alarm goes off.
Vibrating Pad Jacks
You can connect a vibrating pad to each of the vibrating pad jacks on the back of the clock. Jack A is used for Alarm 1 and Jack B is used for Alarm 2. Each shaker operates independently.
Simply plugging the shaker in to the jack and activating the shaker function will allow the shaker to vibrate during the scheduled alarm time.
Press and hold the Shaker | key to activate the |
shaker function. |
|
SOUND ALARM
Adjustable Volume Control
The Volume control increases or decreases the loudness of the alarm, which can go as high as 87 dB. The volume control is adjustable for all 3 sound alarm patterns (see pg. 11 for more information about sound alarm patterns). To adjust the volume, roll the slide wheel up to make it louder and down to make it softer.
Adjustable Tone Control
The Tone control shapes the sound by changing the frequencies of the alarm. The tone control only works for sound alarm Pattern 1 (see page 11 for more information about sound alarm patterns).