SETTINGS
█LCD CONTRAST SETTING
To adjust the brightness of the display, simply move the Dimmer Control located on the back of your clock to HI or LO.
█CONNECTING A LAMP
You are able to connect a lamp to the clock and use the lamp for room lighting and/or alarm clock notification.
1.Connect the lamp to the lamp outlet on the back of the clock.
2.Make sure the lamp is turned to the ON position.
3.Press 
to turn the lamp On/Off.
Note: You will only use to turn the lamp On/Off. Do not turn the lamp to the OFF position.
█ALARM NOTIFICATION MODES AND ACTIVATION
You can adjust the type of notification that is desired. The available notifications for each alarm include: LED/optional Lamp Flashing, Sound (with 3 pattern options), and Vibrating Shaker (1 vibrating pad is included with the SW200). For each alarm, you can select a combination of the 3 notifications.
To activate each of the alarm functions and have them in “ready mode”, simply press and hold the desired notification key until the blue backlight appears. To deactivate, press and hold until the blue backlight disappears. After having each function in “ready mode”, you will be able to select the specific notification you desire for each alarm (see Set the Alarm and Audible, Visual & Shaker Notification on page