Step 3. Connect the square end of the USB cable to the hard drive. (Fig. 2) Then connect the flat end of the USB cable to the USB port on your computer. (Fig. 3)
| Step 4. Turn the power switch on. | |
| USB Port | USB Cable Plug |
|
| |
Fig. 2 |
| Fig. 3 |
|
| |
NOTE: SATA users: install the bracket when the computer is off. Connect the drive to the bracket, turn on the drive and then turn on the computer. See the eSATA bracket installation guide located in the "Contents/CAXM" folder of the Resources CD.
NOTE: Connect the USB cable to the drive before connecting the cable to the computer. To disconnect, remove the cable from the computer first.
10