Instrucciones de montaje y lista de piezas | PW1876 |
|
|
Para ordenar repuestos, sírvase llamar al
4 | 7 | 10 |
| ||
| 12 | |
|
| |
|
| 1 |
Assembly Instructions and Parts List | PW1876 |
|
|
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or prop- erty damage! Retain instructions for future reference.
|
|
| Electric Pressure | ||
|
|
| Washer |
|
|
|
|
| NOTE: REFER TO PRODUCT MANUAL FOR | ||
|
|
| ALL SAFETY INSTRUCTIONS |
| |
|
|
|
|
|
|
Specifications |
|
|
|
|
|
Max Pressure with | Effective Pressure | Maximum | Motor Power | Maximum Inlet | Unit |
Model Standard Lance | w/Turbo Lance | Capacity | (Single Phase) Voltage | Water Temperature | Weight |
5
6 
3 |
| 11 |
| 8 | 2 |
|
|
PW1876 | 1300 psi | 1850 psi | 1.9 GPM | 14.5 Amps | 120V | 100˚F | 39 lbs. |
Assembly Instructions
Notas
Figure 1 | Figure 2 | Figure 3 | Figure 4 |
Garden Hose and System Connection
GARDEN HOSE CONNECTION | 3. Pull side “A” of quick connect | |
INSTRUCTIONS | fitting toward garden hose and | |
1. Attach nipple adapter to inlet fit- | push onto nipple adapter. | |
ting on the unit (this may already | 4. Push side “A” of quick connect | |
be attached to the pump). | ||
fitting towards nipple adapter and | ||
| ||
2. Attach quick connect fitting to gar- | release. | |
den hose. | SYSTEM CONNECTION | |
| ||
| 1. Insert lance into the gun and turn | |
"A" Quick Connect Fitting | clockwise to positive stop as shown | |
in Figure 6. | ||
| ||
Garden |
| |
Hose |
| |
Nipple |
| |
Adapter | Figure 6 - Gun/Lance Connection | |
| ||
Figure 5 - Garden Hose Connection | 2. Ensure that the power switch is in | |
| the “OFF” position. |
3.Attach the high pressure hose and gun assembly to the unit.
4.Connect garden hose as explained under Garden Hose Connection Instructions.
5.Plug the
power cord
into a grounded 120V outlet
and press the reset button as
shown in fig- ure 7. THIS MUST BE
DONE EACH TIME THE UNIT IS PLUGGED INTO AN OUTLET.
© 1999 Campbell Hausfeld | For parts, product & service information | Approved | IN455600AV 1/99 |
| visit www.campbellhausfeld.com | UL #7P64 |
|