Brainboxes RS232 manual Configuration by Menu

Page 31

9.1.2. Configuration by Menu

Select option 2 from the “Main Menu” menu to display the Bluetooth settings menu shown below left.

You should enter here the Bluetooth Address (BD_ADDR) of the remote (server) device you wish to pair (in our case this is 000A-4F-00082D) followed by ENTER.

This should be in the same format as indicated on the products label (NAP-UAP-LAP, for those of you who know)

Press “Esc” to skip this section

Press C to select the client option. This setting is stored immediately and is not discarded upon a reboot. In fact it requires a re-boot in order to activate it.

Press “Esc” to skip this option

Re-boot (power cycle) your converter. When the Client BL-521 is switched on, it will connect to the Server device you have entered in the menu above, assuming of course that the server device is also powered up. Remember of course that the factory shipped configuration of the converters is “server” so only 1 device needs any modification in this respect

Manual for BL-521 5_3.doc

© Copyright Brainboxes Limited 2004

Page 31 of 41

Image 31

Contents Product Manual Table of Contents Worked Examples Changes from earlier versions IntroductionPreamble Products and FirmwareBL-521 Physical Product FeaturesBL-730 Configuration features at a glance Product ConfigurationInstalling the Configuration Application Opening the Configuration Application Support/Links Using the Configuration ApplicationPort Settings Device InfoStop Bits Current SettingsBaud Rate ParityPartner Device Connect UsingPIN Code Client/ServerManual for BL-521 53.doc Copyright Brainboxes Limited Discoverability Advanced SettingsDevice Address Device NameMode Security ModeSecurity mode for converter as Server receives connections HighConnect Scheme Low Power ModeClass of Device HandshakingInteractive Menu Upgrade Device Default settingsAccessing the configuration menus and commands Alternative Product ConfigurationNavigation Configuration MenuCommunications Parameters Main MenuBluetooth Parameters Display, Restore and Update Current and Factory Settings Disabling Interactive Menu Upgrading Firmware Command Description Name Command InterfaceResetting the Product Remote ConfigurationUpgrading your device Manual for BL-521 53.doc Copyright Brainboxes Limited Manual for BL-521 53.doc Copyright Brainboxes Limited Configuring the communications parameters Physically connecting to your RS232 deviceClient/Server Pair Cable Replacement Connecting converters over BluetoothConfiguration by Windows Application Configuration by Menu Bluetooth Enable your PC Server Connecting to BL-521 from a remote Bluetooth deviceConfiguration by Commands Configure and connect the converterConnect to the Serial Port profile Secure the relationshipConnect your application to the new COM port Worked Examples Custom Factory ConfigurationScientific equipment data logging Reference source not found. Error TroubleshootingReference source not found. for Power requirements Technical SpecificationsStorage and Operating Environment Receiver Characteristics Transmitter CharacteristicsGain Antenna CharacteristicsRadiation Patterns Rest of World Regulatory InformationEurope EU Declaration of Conformity Important Notice for use in France and ItalyIndex Version Date Author Checked By Comments Version History