1. Introduction
1.1. Preamble
Brainboxes’ RS232 Bluetooth converters are fully embedded,
For many applications, a Bluetooth converter used in combination with another Bluetooth product (e.g. Brainboxes’ USB adapter connected to a PC with Brainboxes’ Bluetooth Software Suite, or a second converter) essentially replaces the serial cable, freeing the device from the limits imposed by the cable specification and in many applications removes the need for expensive cable installation and maintenance. The devices are designed to appear transparent to a user’s applications that would otherwise be communicating via a COM port and over a cable, therefore no specific Bluetooth programming is required. The connection uses Bluetooth security to ensure that sensitive data is not “sniffed” by any unauthorised source, although this feature can be turned off.
The products described by this document are designed as cable replacement products. Their primary function is to offer “point to point” Bluetooth capabilities to devices which otherwise do not have the capacity for such behaviour. This capability is configured by a “set and forget” interface, which is not designed to cater for multiple device connection scenarios. At the time of publication, the converters are only capable of connecting to one other Bluetooth device at a time.
The converter is user configurable to baud rates between 244 and 1.3Mbaud in steps of 244, with none, odd, or even parity, and with 1 or 2 stop bits. Its default factory settings are 115,200 baud, no parity, 8 data bits and 1 stop bit.
A convenient reset button can be used to restore various functions of the device including a restore of factory settings.
We trust that if you adhere to the following procedures you will enjoy many years of useful service from your Brainboxes Bluetooth Converter.
1.2. Products and Firmware
This document covers Brainboxes part numbers
This document covers firmware versions from 4.0 Onwards. For documentation of features in versions of firmware prior to 4.0 please see previous revision manual. A superscripted version number, e.g. “Upgrade Device Firmware 3.0”, identifies additions to the original firmware and specifies from which firmware revision the addition applies.
1.3. Changes from earlier versions
This manual begins a major transformation to the configuration utility application as well as the addition of four new features and significant bug fixes. Based on customer feedback, the Windows configuration application has been simplified and designed to reflect the new style incorporated into Windows XP Service Pack 2. It also has the ability to upgrade the device directly.
There is also a new Configuration Wizard, which provides a
Additional features to the firmware include:
∙Handshaking – DTR/DSR
∙Remote Configuration
∙Low Power Modes
Manual for | © Copyright Brainboxes Limited 2004 | Page 4 of 41 |