Aspire Digital M261, M1610 manual S3 STR, Yes, SYNC+Blank, Pre-State, Bit Mode

Parameter	Description	Options
ACPI Suspend Type	This item specifies the power saving modes for ACPI	S1 (POS)
	function. S1(POS): The S1 sleep mode is a low power	S3 (STR)
	state. In this state, no system context (CPU or chipset) is	S1&S3
	lost and hardware maintains all system context. S3 (STR):
	The S3 sleep mode is s power-down state in which power
	is supplied only to essential components such as main
	memory and wake-capable devices and all system context
	is saved to main memory. The information stored in
	memory will be used to restore the PC to the previous state
	when an wake-upevent occurs. S1&S3: Both S1 and S3
	will be adopted.
Video Off in Suspend	This option is used to set video mode in suspend status.	Yes
	The setting values are Yes and No.	No
Video Off Method	This item determines the manner in which the monitor is	Blank Screen
	blanked.	V/H SYNC+Blank
	V/H SYNC+Blank: This selection will cause the system to	DPMS
	turn off the vertical and horizontal synchronization ports
	and write blanks to the video buffer. Blank Screen: This
	option only write blanks to the video buffer. DPMS
	Supported: Initial display power management signaling.
Modem Use IRQ	This setting names the interrupt request (IRQ) line	Auto
	assigned to the modem (if any) on your system. Activity of	3,4,5,7,9,10,11
	selected IRQ always awakens the system.
HDD Power Down	This option is used to define the continuous HDD	Disabled
	idle time before the HDD enters power saving	1,2,3,4,5,6,7,8,9,10,11,1
	mode. The setting values are disabled and 1 min	2,13,14,15 Min
	to 15 min.
Soft-off by PWR-BATTN	This option is used to set the power down	Instant Off
	method. This function is only valid for systems	Delay 4 Sec.
	using an ATX power supply. When ““instant off” is selected,
	press the power switch to immediately
	turn off power. When “delay 4 sec” is selected, press and
	hole the power button for four seconds to turn off power.
PWRON After PWR-Fail	This item allow user set the machine power state when	Always Off
	connect the AC power. "Always off" means the machine is	Always On
	always off when power on; "Always on" means the	Pre-State
	machine will always power on when connect the AC power;
	"Pre-State" means the machine state is the same as the
	last state.
Power On By Ring	These items allow users to customize how the system	Disabled
	behaves in standby mode. The separate items are set to
Wakeup By LAN PME		Disabled
	Enabled or Disabled to determine whether the specified
LAN Remote Wakeup		Disabled
	action wakes up the system.
Wakeup By PME		Disabled
Wakeup By USB KB/MS		Enabled
Wakeup By PS2 KB/MS		Enabled
Resume By Alarm	When enabled, this item activates the Month, Day, and	Disabled
	Time fields. Setting these fields causes the system to	Enabled
	wakeup on the specified date and time.
HPET Support	This item enables or disables support for the High	Enabled
	Precision Event Timer (HPET).	Disabled
HPET Mode	This item sets the High Precision Event Timer (HPET)	32-bit Mode
	mode.	64-bit Mode

Chapter 2 35