Aspire Digital M261, M1610 manual PC Health Status

PC Health Status

The following screen shows the PC Health Status parameters and their default settings:

Phoenix - AwardBIOS CMOS Setup Utility

PC Health Status

CPU Warning Temperature	[70°C/150°F]		Item Help
CPU Shutdown Temperature	[90°C/194°C]
SYS Shutdown Temperature	[70°C/150°F]		Menu Level X
CPU Core Voltage	1.28V
DIMM Voltage	1.77V
+3.3V	11.84V
+5.0V	4.91V
+12V	11.96V
CPU Temperature	21°C
SYS Temperature	36°C
CPU Fan Speed	881 RPM
SYS Fan Speed	919 RPM
Smart FAN Control	[Enabled]
KLIJ :Move Enter: Select	+/-/PU/PD :Value	F10: Save and Exit ESC:Exit
F1: General Help F5: Previous Values		F7: Optimized Defaults

The following table describes the parameters found in this menu:

Parameter	Description	Options
CPU Warning	This item lets you select the temperature at which	Disabled
Temperature	you want the system to send out a warning
	message to the PC speakers of when the
	temperature goes beyond either limit.
CPU Shutdown Temp.	This option is for setting the shutdown temperature level for the processor. When
	the processor reaches the temperature you set, the system will be shut down.
SYS Shutdown Temp.	This option is for setting the shutdown temperature level for the system. When the
	system reaches the temperature you set, the ACPI-aware system will be shut down.
CPU Core Voltage to	These items in light blue show various current system voltage, temperature, and
SYS Fan Speed	speed measurements. These items are read only and cannot be altered.
Smart FAN Control	Enable smart fan control function.	Enabled
	--When the CPU temperature is higher than 65	Disabled
	degrees Celsius, CPU fan will run at full speed.
	--The speed of CPU fan will increase linearly
	depend on the temperature if the temperature is
	more than 41 degree and less than 65 degree.
	--When the CPU temperature is lower than 40
	degrees Celsius, CPU fan will be disable.

Chapter 2 37