ATI Technologies X600 manual To create a Desktop or Full Screen 3D profile

	ATI Color Tab 13
ATI Color Tab
Save button	Saves your current color settings to a Desktop or Full
	Screen 3D profile, using the name you specified in the list
	box. To restore these settings later, simply select the
	Profile name from the list and click Apply or OK.
Delete button	Deletes the profile that is selected in the Profiles list box.
All Colors	Adjusts the Gamma, Brightness or Contrast for Red,
checkbox	Green, and Blue simultaneously. Note that any individual
	color settings in effect are lost if All Colors is selected; the
	color settings revert back to the last-known All Colors
	settings.
Red, Green, and	Selects the active color component (Red, Green, or Blue)
Blue radio	whose values will be adjusted by the Gamma, Brightness,
buttons	and Contrast sliders. Note that any individual color settings
	made are lost if you subsequently select All Colors.
Gamma slider	Increases or decreases the gamma correction of your
	Desktop or full screen 3D application. Changing the
	gamma alters the curvature of the color curve.
Brightness slider	Increases or decreases the color brightness of your
	Desktop or full screen 3D application. Changing the
	brightness adjusts the vertical position of the color curve.
Contrast slide	Increases or decreases the color contrast of your Desktop
	or full screen 3D application. Changing the contrast
	adjusts the slope of the color curve.
Reset buttons	Restores an individual slider setting to its default value.
	Click Apply or OK to save.
Color preview	The color image indicates visually how the Gamma,
box	Brightness and Contrast sliders affect the final color
	settings of your display device. In Desktop mode, clicking
	on this with your mouse pointer will change the image.
Hotkeys button	Opens the Color Hotkeys Settings dialog. There you can
	assign hotkeys for adjusting your color settings within a full
	screen 3D application environment. To activate this
	button, you must select the Full Screen 3D radio button.
Defaults button	Restores all of the color settings to the default values.
	Click Apply or OK to save.

To create a Desktop or Full Screen 3D profile

1Choose either the Desktop or Full Screen 3D radio button, as desired.