ATI Technologies X600 manual Clone Mode Settings, ATI Overlay Tab

ATI Overlay Tab 23

ATI Overlay Tab

Brightness	Adjusts the brightness of the video image.
Contrast	Adjusts the contrast in the video image.
Saturation	Adjusts the vividness of the color. Sliding it all the way to
	the left removes all color and produces a black and white
	picture.
Hue	Adjusts the pureness or tint of the red, green, and blue
	components of the color.
Gamma	Adjusts the overall intensity of the video image.
Clone mode	Accesses Clone Mode overlay settings.These settings
options	only apply to video content when viewed in dual-controller
	Clone mode. For more information, see the Clone Mode
	Settings section.
Defaults button	Resets the Overlay settings to default values.
Theater Mode	Displays video playback in full screen on a secondary
	monitor, if available and enabled.

Clone Mode Settings

Clone Mode Options are available under the following conditions:

•Your ATI graphics accelerator has dual controllers to support Primary and Secondary (Clone) displays.

•Your ATI video adapter has dual display functionality by providing a standard VGA connector and a digital flat panel connector such as the DVI-I connector.

In either of these cases, you can access Clone Mode Options if more than one display is connected.

Note: These settings apply to video content viewed when you are in dual-controller Clone mode, and not single-display or extended desktop configurations.