ATI Technologies 9000 Display Configurations, Display Connectors Used Comments Configuration

5

Display Configurations

The following table lists the different ways you can connect displays to your card.

Display	Connector(s) Used	Comments
Configuration
One CRT	VGA connector OR DVI-I	CRT- cathode ray tube
	connector with DVI-I-to-
display		analog display
	VGA adapter*
One DFP	DVI-I connector	DFP - digital flat panel
display		display
		Cards with S-Video out also
		support Composite out via
		an S-Video-to-Composite
One TV	TV Output	adapter*. Cards with
		Composite out DO NOT
		support connection to TVs
		with S-Video Input.
		Unsupported configuration
CRT display +	VGA connector +	if the CRT display is
		attached to the DVI-I
TV	TV Output
		connector via a DVI-I-to-
		VGA adapter*
DFP display +	DVI-I connector +
TV	TV Output
CRT display +	VGA connector + DVI-I
DFP display	connector
	VGA connector + DVI-I	The DVI-I connector can
CRT display +		support a CRT display
	connector with DVI-I-to-
CRT display		using a DVI-I-to-VGA
	VGA adapter*
		adapter*
CRT display +	VGA connector + DVI-I	The TV display will “clone”
DFP display +		the image of one of the
	connector + TV Output
TV		other two displays.
CRT display +	UNSUPPORTED
CRT display +
	CONFIGURATION
TV

*point to www.ati.com for purchase