AOC LM720BGE user manual Adjusting the OSD Settings

Page 11

Operating Instructions

AOC LM720BGE

 

 

Adjusting the OSD Settings

1.Press the MENU button to open the OSD window.

2.Press the < or > buttons until the desired function is highlighted.

3.Press MENU to open the function’s window.

4.Press the < or > buttons to change the settings of the function.

AOC LM720BGE

5.To save and exit, highlight the EXIT icon and press MENU or leave the monitor alone for 10 seconds. If you want to adjust any other function, repeat steps 2-4.

Note: When the OSD window is open, the input signal timing settings appear at the top.

H:stands for horizontal frequency and

V:stands for vertical frequency.

11

v1_031004

Image 11
Contents Inch TFT LCD Monitor User’s ManualFCC Statement For Your SafetyPrecautions General Notes Using the Right Power CordSpecial Notes on LCD Monitors Before You Operate the Monitor Installing & Removing the Base General FeaturesPackage Contents Connecting the Wires Using the Power Cord Supplied Before You Operate the Monitor Install An Optional Wall Mounting Arm Not supplied How to Install INF & ICM File Adjusting the Viewing AngleFront Panel Buttons Operating InstructionsAdjusting the OSD Settings DOS-mode How to Optimize the DOS-modePlug & Play DDC1/2B Feature Problem Possible Solution Technical Support FAQError Message Possible Solution Error Message Technical Support FAQAppendix SpecificationsEPA Energy Standard Resolution Horizontal Vertical Pixels Frequency Factory Preset Timing TablePin Number Description Connector Pin Assignment