AOC LM720BGE user manual Adjusting the Viewing Angle, How to Install INF & ICM File

Page 9

Before You Operate the Monitor

AOC LM720BGE

Adjusting the Viewing Angle

For optimal viewing, adjust the monitor's angle to your own preference.

•Hold the stand firmly when you change the monitor's angle.

•You can adjust the monitor's angle from -5° to 25°.

•Do not touch the LCD screen when you change the angle. It may cause damage or breakage.

•Be careful to avoid pinching your hand in the swivel base.

How to Install INF & ICM File

1.Insert the Windows 95/98/2000/ME/XP INF Driver Disk into your floppy drive.

2.Follow the Add New Hardware Wizard instructions on the screen.

3.If the wizard asks for the location of the driver file, select drive A and press Next.

AOC LM720BGE	9	v1_031004

Image 9

Contents Inch TFT LCD Monitor User’s ManualFCC Statement For Your SafetyPrecautions Using the Right Power Cord Special Notes on LCD MonitorsGeneral Notes Installing & Removing the Base General Features Package ContentsBefore You Operate the Monitor Connecting the Wires Using the Power Cord Supplied Before You Operate the Monitor Install An Optional Wall Mounting Arm Not supplied How to Install INF & ICM File Adjusting the Viewing AngleFront Panel Buttons Operating InstructionsAdjusting the OSD Settings How to Optimize the DOS-mode Plug & Play DDC1/2B FeatureDOS-mode Problem Possible Solution Technical Support FAQError Message Possible Solution Error Message Technical Support FAQAppendix SpecificationsEPA Energy Standard Resolution Horizontal Vertical Pixels Frequency Factory Preset Timing TablePin Number Description Connector Pin Assignment