Anaheim MBC10SI1 manual Connecting the Step Motor, Circuit Protection

Page 10

8 Lead Motors

Series Connection: When configuring the motor windings in series, use the per phase (or unipolar) current rating to determine the current setting potentiometer value.

Parallel Connection: When configuring the motor windings in parallel, multiply the per phase (or unipolar) current rating by 2.0 to determine the current setting potentiometer value.

Note: After the current has been determined, according to the motor connections above, use the potenti- ometer setting table to choose the proper setting for the current setting potentiometer.

Connecting the Step Motor

The MB10SI1 is designed to accept one motor. For wiring of the motor refer to the pages containing the connector descriptions and hookup diagrams. The motor is wired into pins 3, 4, 5 and 6 of the terminal block.

Note: The physical direction of the motor with respect to the direction input will depend on the connection of the motor windings. To reverse the direction of the motor with respect to the direction input, switch the wires on phase 1 and phase 3. With the operation of 2 motors, they will run in the opposite direction when wired the same.

WARNING: Do not connect or disconnect motor wires while power is applied!

Circuit Protection

This driver is equipped with over current protection.

Note: When drive experiences a fault condition, it will seize to function. Power down, inspect wiring, motors, etc. and allow for a 30 second pause to resume functioning. If driver is too hot, additional ventilation and airflow should be added to prevent temperature to exceed recommended temperature limit.

#L010185

10

June 2007

Page 9 Page 11
Image 10
Page 9 Page 11
Contents MBC10SI1 Introduction FeaturesMotion Profiles and Running the Indexer Soft Limit Activated During Index Motion Profiles and Running the Indexer Normal OperationHard Limit Activated During Index Baud Rates LEDsInputs and Outputs Connector Description Connector P2Specifications Ordering Information#L010185 June Potentiometer Settings Setting the Output CurrentReducing Output Current Determining Output Current Step Motor ConfigurationsLead Motors Connecting the Step Motor Circuit ProtectionFunctions Getting Started InstallationSMPG-SMSI Software Changing the COM Port Number of the USB portUnit is Connected / The Unit is not Connected File Menu Setup MenuToolbar Program Window Unit Selection Direct Talk ModeCOM Port Settings Instructions#L010185 June Saved in the EEProm for standalone use VB2 Visual Basic Direct Mode Programming Examples Troubleshooting Error Codes Ascii Table for Direct ModeTorque Speed Curves

MBC10SI1 specifications

The Anaheim MBC10SI1 is an advanced temperature controller designed to provide precise monitoring and control for a variety of industrial applications. Built with reliability and flexibility in mind, this device is ideal for both laboratory and production environments. Its compact size allows for easy integration into existing systems, while its robust functionality makes it a popular choice among technicians and engineers alike.

One of the standout features of the MBC10SI1 is its digital display, which provides clear visibility of temperature readings and settings. The user-friendly interface allows operators to quickly adjust parameters, making it easy to customize the control settings according to specific processes. This model is equipped with a high-resolution temperature sensor that ensures accurate and timely readings, reducing the possibility of errors in sensitive applications.

The MBC10SI1 utilizes advanced PID control technology. PID, or Proportional-Integral-Derivative control, is essential for maintaining the desired temperature by continuously adjusting the controller's output. This ensures stable temperatures with minimal fluctuations, which is crucial in processes such as chemical reactions, material processing, or environmental testing.

Additionally, the device supports multiple input types, including thermocouples and RTDs, providing versatility for various applications. It is capable of handling a wide temperature range, making it suitable for both high and low-temperature environments. The MBC10SI1 also features alarm functions that notify users of out-of-range conditions, enabling proactive measures to prevent equipment damage or product loss.

Moreover, the MBC10SI1 includes options for programmable settings, allowing for multiple temperature profiles and schedules. This feature is particularly useful for complex processes that require different temperature parameters at different stages.

Connectivity options enhance the usability of the MBC10SI1, with possibilities for integration into broader automation systems. This feature supports various communication protocols, enabling seamless data transmission and monitoring.

In summary, the Anaheim MBC10SI1 is a state-of-the-art temperature controller designed for precision and versatility. With its robust PID control, multiple input capabilities, alarm functions, and programmable settings, it stands out as a reliable solution for a wide range of temperature-sensitive applications, making it an essential tool in modern industrial operations.
Top Page Image Contents