Features, Introduction | Anaheim MBC10SI1 specification

Features

•Output Current of 10.0A Peak

•2000 Steps/Revolution

•On-Board Programmable Simple Indexer with 2 motion profiles

•Pulses From 1Hz to 50kHz

•Directional Soft and Hard Limit Switch Inputs

•Complete Output

•Busy Output

•Motor On/Off Input and Automatic Current Reduction

•Short Circuit Protection

Introduction

The MBC10SI1 is an low cost single axis step motor driver integrated with a programmable simple indexer. The MBC10SI1 microstep driver/pulse generator has an output current capability of 1.5A minimum to 10.0A maximum (peak rating). The MBC10SI1 driver operates with a DC voltage of 20VDC to 80VDC. The MBC10SI1’s internal controller has two different programmable motion profiles. The MBC10SI1 also has directional soft and hard limit switch inputs, a busy output and a complete output letting the user know when an inded is finished. The MBC10SI1 driver features direction control and motor current On/Off capabilities. The “Reduce Current Enabled” feature automatically reduces motor current to 50% of the set value. The driver has built in features to indicate power on (green LED), running (yellow LED) and error conditions (red LED). The MBC10SI1 has a fixed step resolution of 2000 steps/ revolution for a 1.8º stepper motor. The bipolar drive configuration handles 4, 6, and 8 lead step motors and is also equipped with over current protection. The MBC10SI1 communicates via USB communication. The easy to use Windows software, SMPG-SMSI Software, is used to directly set up the two different motion profiles.

Motion Profiles and Running the Indexer

The programmable simple indexer has the ability to store two different motion profiles. The profiles include a base speed (starting speed), a maximum speeds (running speed), acceleration/deceleration, the number of steps (index) and a complete time (output signal). The base speed has a range of 1-5000 Hz, the maximum speed has a range of 1 Hz-50 kHz, the acceleration/deceleration has a range of 100 to 9,999,999 steps/sec2, the index has a range of 0-8,388,607 steps and the complete time has a range of 1-1000 milliseconds.

There are “two ways” to get the unit to index: Examples are shown on the next page.

1)The first way is to directly control it from the computer with the software provided. Once the motion profiles have been set, the unit is ready to index. From the software, the user can select which profile to run and then click the begin index button. If a soft limit command is sent or a soft limit input is activated, then the unit will immediately ramp down to base speed and continue running until the index has completed. To stop all motion before the index has completed, a hard limit command needs to be sent or a hard limit input must be activated.

2)The second way to make the unit run is to activate the individual index input. When an index input is activated, it selects from memory the speed profile that was selected. If a soft limit input is activated, then the unit will immediately ramp down to base speed and continue running until the index has completed. To stop all motion before the index has completed a hard limit input must be activated.

#L010185

June 2007

MBC10SI1 specifications

The Anaheim MBC10SI1 is an advanced temperature controller designed to provide precise monitoring and control for a variety of industrial applications. Built with reliability and flexibility in mind, this device is ideal for both laboratory and production environments. Its compact size allows for easy integration into existing systems, while its robust functionality makes it a popular choice among technicians and engineers alike.

One of the standout features of the MBC10SI1 is its digital display, which provides clear visibility of temperature readings and settings. The user-friendly interface allows operators to quickly adjust parameters, making it easy to customize the control settings according to specific processes. This model is equipped with a high-resolution temperature sensor that ensures accurate and timely readings, reducing the possibility of errors in sensitive applications.

The MBC10SI1 utilizes advanced PID control technology. PID, or Proportional-Integral-Derivative control, is essential for maintaining the desired temperature by continuously adjusting the controller's output. This ensures stable temperatures with minimal fluctuations, which is crucial in processes such as chemical reactions, material processing, or environmental testing.

Additionally, the device supports multiple input types, including thermocouples and RTDs, providing versatility for various applications. It is capable of handling a wide temperature range, making it suitable for both high and low-temperature environments. The MBC10SI1 also features alarm functions that notify users of out-of-range conditions, enabling proactive measures to prevent equipment damage or product loss.

Moreover, the MBC10SI1 includes options for programmable settings, allowing for multiple temperature profiles and schedules. This feature is particularly useful for complex processes that require different temperature parameters at different stages.

Connectivity options enhance the usability of the MBC10SI1, with possibilities for integration into broader automation systems. This feature supports various communication protocols, enabling seamless data transmission and monitoring.

In summary, the Anaheim MBC10SI1 is a state-of-the-art temperature controller designed for precision and versatility. With its robust PID control, multiple input capabilities, alarm functions, and programmable settings, it stands out as a reliable solution for a wide range of temperature-sensitive applications, making it an essential tool in modern industrial operations.