Anaheim MBC10SI1 manual VB2

Page 18

S - Stop Soft

Format: S

Description: This command will cause the indexer to ramp down to base speed and run

until the index is complete or a hard limit is activated. It can only be used when the unit is indexing.

T - Complete Time

Format: T#_[value] - where # is the motion profile number 1 or 2

Sample:

T1_100

Complete Time of profile 1 equals 100

Description: This command sets the time for an active complete siganal after the unit has fin- ished indexing for the motion profile. The number is enterd as milliseconds. This value must be set before motion begins. These values are saved in the EEProm for standalone use.

Range: 0 - 1000

V - Verify

Description: This command can be used with most commands to verify the register contents. This is a read only command. Valid Commands are: A, B, C, D, M, R, and +.

Format: V[command]

This format is good for C, and +.

C - If a 1 is sent back then the driver is in reduced current mode. If a 0 is sent back then the driver is not in reduced current mode.

+- If a 1 is sent back then the direction is clockwise. If a 0 is sent back then the direction is counterclockwise.

Sample:

V+

Verification of Direction is prompted.

Format:

V[command]# - where # is the speed profile number 1 thru 4

 

This format is good for A, B, and M.

A# -

Verify Acceleration/Decceleration for given speed profile.

B# -

Verify Base speed for given speed profile.

M# - Verify Max speed for given speed profile.

N# - Verify Index number for given speed profile.

T# -

Verify Complete time for given speed profile

Sample:

VB2

Verification of Base Speed in Profile 3 is prompted.

#L010185

18

June 2007

Page 17 Page 19
Image 18
Page 17 Page 19
Contents MBC10SI1 Features IntroductionMotion Profiles and Running the Indexer Motion Profiles and Running the Indexer Normal Operation Soft Limit Activated During IndexHard Limit Activated During Index LEDs Baud RatesInputs and Outputs Connector Description Connector P2Specifications Ordering Information#L010185 June Setting the Output Current Potentiometer SettingsReducing Output Current Step Motor Configurations Determining Output CurrentLead Motors Connecting the Step Motor Circuit ProtectionFunctions Getting Started InstallationSMPG-SMSI Software Changing the COM Port Number of the USB portFile Menu Setup Menu Unit is Connected / The Unit is not ConnectedToolbar Program Window Unit Selection Direct Talk ModeCOM Port Settings Instructions#L010185 June Saved in the EEProm for standalone use VB2 Visual Basic Direct Mode Programming Examples Troubleshooting Error Codes Ascii Table for Direct ModeTorque Speed Curves

MBC10SI1 specifications

The Anaheim MBC10SI1 is an advanced temperature controller designed to provide precise monitoring and control for a variety of industrial applications. Built with reliability and flexibility in mind, this device is ideal for both laboratory and production environments. Its compact size allows for easy integration into existing systems, while its robust functionality makes it a popular choice among technicians and engineers alike.

One of the standout features of the MBC10SI1 is its digital display, which provides clear visibility of temperature readings and settings. The user-friendly interface allows operators to quickly adjust parameters, making it easy to customize the control settings according to specific processes. This model is equipped with a high-resolution temperature sensor that ensures accurate and timely readings, reducing the possibility of errors in sensitive applications.

The MBC10SI1 utilizes advanced PID control technology. PID, or Proportional-Integral-Derivative control, is essential for maintaining the desired temperature by continuously adjusting the controller's output. This ensures stable temperatures with minimal fluctuations, which is crucial in processes such as chemical reactions, material processing, or environmental testing.

Additionally, the device supports multiple input types, including thermocouples and RTDs, providing versatility for various applications. It is capable of handling a wide temperature range, making it suitable for both high and low-temperature environments. The MBC10SI1 also features alarm functions that notify users of out-of-range conditions, enabling proactive measures to prevent equipment damage or product loss.

Moreover, the MBC10SI1 includes options for programmable settings, allowing for multiple temperature profiles and schedules. This feature is particularly useful for complex processes that require different temperature parameters at different stages.

Connectivity options enhance the usability of the MBC10SI1, with possibilities for integration into broader automation systems. This feature supports various communication protocols, enabling seamless data transmission and monitoring.

In summary, the Anaheim MBC10SI1 is a state-of-the-art temperature controller designed for precision and versatility. With its robust PID control, multiple input capabilities, alarm functions, and programmable settings, it stands out as a reliable solution for a wide range of temperature-sensitive applications, making it an essential tool in modern industrial operations.
Top Page Image Contents