Allied Telesis 86253-07 manual PCR Module Ikmp Level, PCR Module Ipsec Level

Page 22

22

SHOW IGMPSNOOPING ROUTERADDRESS

Patch Release Note

PCR: 03925

Module: IPV6

Level: 3

Incorrect debug information was returned when an ICMPv6 PacketTooBig message was received. This issue has been resolved.

PCR: 03928

Module: IKMP

Level: 2

ISAKMP in aggressive mode did not establish a connection when the peer client sent 10 or more payloads. This issue has been resolved.

PCR: 03931

Module: IPSEC

Level: 3

The IPSec configuration was not created correctly when the RADDRESS and LNAME parameters in the CREATE IPSEC POLICY command were used together. This issue has been resolved.

PCR: 03934

Module: IPSEC

Level: 2

The CREATE IPSEC POLICY command failed if the interface specified with the INTERFACE parameter did not have a global IPv6 interface defined. This PCR implements a workaround by using the interface’s link-local IPv6 address if no other IPv6 address can be found.

PCR: 03935

Module: ISAKMP

Level: 3

ISAKMP debug messages now correctly output IPv6 addresses when using

IPv6, and IPv4 addresses when using IPv4.

PCR: 03936

Module: IKMP

Level: 3

When ISAKMP was used with IPv6, an incorrect IP address was displayed in the output of the SHOW ISAKMP EXCHANGE command. This issue has been resolved.

PCR: 03938

Module: IKMP

Level: 3

DHEXPONENTLENGTH parameter in the CREATE ISAKMP POLICY command was not accepted when creating ISAKMP policies that used IPv6. This issue has been resolved.

PCR: 03939

Module: IPV6

Level: 2

When a NeighbourAdvert message containing an anycast target address was received, the device incorrectly performed Duplicate Address Detection. This issue has been resolved.

PCR: 03946

Module: IPSEC

Level: 3

When IPSec was used with IPv6, an incorrect IP address was displayed in the output of the SHOW IPSEC SA command. This issue has been resolved.

PCR: 03949

Module: IPSEC

Level: 3

If a local IP address and remote IP address were not specified in the CREATE IPSEC POLICY command for IPv6 IPSec, the SET IPSEC POLICY configuration was shown unnecessarily in the output of the SHOW CONFIG DYNAMIC=IPSEC command. This issue has been resolved.

PCR: 03952

Module: SWI

Level: 3

MAC address are now deleted from the all the internal tables for ports where the learn limit has been exceeded.

Patch 86253-07 for Software Release 2.5.3 C613-10382-00 REV E

Image 22
Contents Patch For Rapier Series Switches PCR Module IPG Level PCR Module Firewall LevelPCR Module PIM, PIM6 Level PCR Module IPv6 LevelPCR 31202 Module QOS Level PCR Module PIM6 LevelPCR Module SWI Level PCR Module Vrrp LevelPCR Module SWI, SW56 Level PCR Module L3F LevelPCR Module VLAN, IPG Level PCR 31258 Module IPG, DhcpPCR Module NTP Level PCR Module CURE, IPG, ATK LevelPCR 40006 Module LOG Level PCR Module IPG, Ospf LevelPCR Module PIM Level PCR Module STP LevelPCR Module TTY Level PCR Module PKI LevelPCR Module Utility Level PCR Module Http LevelPCR Module SWI Level PCR Module FFS Level PCR Module Ldap LevelPCR Module File Level PCR 31098 Module Dhcp LevelPCR 31122 Module Rmon Level PCR 31106 Module MLD LevelPCR 31119 Module LOG Level PCR Module IPX2 LevelADD Igmpsnooping Routeraddress Show Igmpsnooping Routeraddress PCR Module Rstp LevelPCR 31147 Module Dhcp Level PCR 31152 Module Dhcp LevelPCR 31159 Module FW, Vlan Level PCR Module User LevelPCR 02414 Module IPV6, SWI, IPG, Vlan PCR Module BGP, IP LevelPCR 02577 Module IPG, LOG Level PCR Module ETH, IPG, IPv6, IPX Level PCR Module OSPF, IPG LevelPCR 03622 Module Enco Level PCR Module TTY, User Level PCR Module BGP LevelPCR 03751 Module Mlds Level PCR Module Ikmp Level PCR Module Install LevelPCR Module ETH Level PCR 03801 Module Mlds LevelPCR Module IPG, IPV6 Level PCR Module Ping Level PCR 03870 Module SWI, Vlan LevelPCR 03874 Module Dhcp Level PCR Module DHCP, Telnet LevelPCR 03895 Module Dhcp Level PCR Module Switch LevelPCR Module IGMP, SWI Level PCR 03914 Module IPG, Vlan LevelPCR Module Ipsec Level PCR Module BGP, IPG Level PCR 31001 Module Dhcp LevelPCR 031020 Module PIM Level PCR 03691 Module Dvmrp Level PCR Module IPG, SWI LevelPCR 03515 Module Dhcp Level PCR 03698 Module Dvmrp LevelPCR 03708 Module Dhcp Level PCR Module IP LevelPCR Module Rsvp Level PCR 03779 Module Dhcp LevelPCR 03788 Module Dhcp Level PCR 03799 Module Dhcp LevelEnable and Disable Icmp Messages Enable IP Icmpreply MLD Snooping Igmp Snooping All-Group Entry Show IP Igmp Enable IP Igmp Allgroup Availability

86253-07 specifications

The Allied Telesis 86253-07 is a high-performance, versatile switch designed for enterprise networking environments. With its robust feature set and advanced technologies, the 86253-07 caters to a wide range of networking applications, making it an optimal choice for businesses seeking reliable and scalable connectivity solutions.

At the core of the Allied Telesis 86253-07 is its capability to deliver high-speed data transfer, accommodating demanding applications such as VoIP, video conferencing, and large file transfers. The switch supports Gigabit Ethernet ports, providing speeds of up to 1 Gbps for seamless connectivity between devices. This performance is supplemented by its Layer 2 and Layer 3 switching capabilities, allowing for efficient data routing and management across complex networks.

One of the notable features of the 86253-07 is its support for Power over Ethernet (PoE). This technology simplifies the deployment of network devices like IP cameras and wireless access points, as it enables the switch to deliver power and data over a single Ethernet cable. This not only reduces installation costs but also enhances flexibility in network design.

The switch also offers advanced security features to protect sensitive data and network infrastructure. It incorporates various protocols such as IEEE 802.1X for port-based network access control, ensuring that only authorized devices can connect to the network. Additionally, features like VLANs (Virtual Local Area Networks) allow for effective segmentation of network traffic, further enhancing security and performance.

Allied Telesis ensures that the 86253-07 is easy to manage and monitor with its user-friendly interface. The switch supports management protocols like SNMP (Simple Network Management Protocol) and provides web-based management options, making it accessible for IT administrators to configure and troubleshoot the network efficiently.

Another significant characteristic is its reliability and durability. Built with high-quality components, the 86253-07 is designed to withstand varying environmental conditions, ensuring uninterrupted network operation in challenging settings.

In summary, the Allied Telesis 86253-07 is a powerful switch equipped with Gigabit Ethernet, PoE support, advanced security features, and straightforward management options. Its combination of performance, reliability, and flexibility makes it an excellent solution for enterprises looking to enhance their networking capabilities.