Allied Telesis 86253-07 manual PCR Module OSPF, IPG Level, PCR Module ETH, IPG, IPv6, IPX Level

Page 16

16

SHOW IGMPSNOOPING ROUTERADDRESS

Patch Release Note

PCR: 03268

Module: SWI

Level: 1

When using MVR on a Rapier 48 or Rapier 48i, multicast packets were not forwarded correctly between ports 1-24 and 25-48. This issue has been resolved.

PCR: 03409

Module: SWI

Level: 2

The switch filter was not operating correctly after a boot cycle. This issue has been resolved.

PCR: 03524

Module: OSPF, IPG

Level: 2

OSPF disabled RIP unless RIP was activated using the SET OSPF RIP command. This issue has been resolved.

PCR: 03560

Module: IPV6

Level: 2

A fatal error sometimes occurred when IPv6 multicast packets were forwarded via an interface that went down and then came back up. This issue has been resolved.

PCR: 03598

Module: ETH, IPG, IPv6, IPX,

Level: 3

 

PORT, PPP.

 

After about 250 days, commands such as SHOW BRIDGE COUNT were not displaying the correct number of seconds for Uptime and Last Change At. days. This issue has been resolved.

PCR: 03616

Module: IPG

Level: 4

Three new commands have been added to enable and disable transmission of the following ICMP messages: Network Unreachable, Host Unreachable, and all Redirect messages.

The commands are:

DISABLE IP

ICMPREPLY[={ALLNETUNREACHHOSTUNREACHREDIRECT}]

ENABLE IP

ICMPREPLY[={ALLNETUNREACHHOSTUNREACHREDIRECT}]

SHOW IP ICMPREPLY

For details, see “Enable and Disable ICMP Messages” on page 28.

PCR: 03622 Module: ENCO

Level: 2

Interoperating with other vendors implementations of ISAKMP was occasionally causing errors following key exchanges. This relates to differing implementations of the RFC regarding the retention of leading zeros. This issue has been resolved by modifying the software to retain leading zeros. An additional command provides compatibility with routers that still use previous software versions. The command details are:

SET ENCO DHPADDING={ONOFF}

This command controls the padding process for Diffie Hellman generated values. This may be required when interoperability is required with other vendor’s equipment that uses the Diffie Hellman algorithm.

The DHPADDING parameter specifies whether the Diffie Hellman generated values should be padded or not. If ON is specified, then leading zeros will be inserted into the generated values. If OFF is specified, then the generated values will not be padded. The default is ON.

Patch 86253-07 for Software Release 2.5.3 C613-10382-00 REV E

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Patch For Rapier Series Switches PCR Module Firewall Level PCR Module PIM, PIM6 LevelPCR Module IPG Level PCR Module IPv6 LevelPCR Module PIM6 Level PCR Module SWI LevelPCR 31202 Module QOS Level PCR Module Vrrp LevelPCR Module L3F Level PCR Module VLAN, IPG LevelPCR Module SWI, SW56 Level PCR 31258 Module IPG, DhcpPCR Module CURE, IPG, ATK Level PCR 40006 Module LOG LevelPCR Module NTP Level PCR Module IPG, Ospf LevelPCR Module STP Level PCR Module TTY LevelPCR Module PIM Level PCR Module PKI LevelPCR Module Utility Level PCR Module Http LevelPCR Module SWI Level PCR Module Ldap Level PCR Module File LevelPCR Module FFS Level PCR 31098 Module Dhcp LevelPCR 31106 Module MLD Level PCR 31119 Module LOG LevelPCR 31122 Module Rmon Level PCR Module IPX2 LevelADD Igmpsnooping Routeraddress Show Igmpsnooping Routeraddress PCR Module Rstp LevelPCR 31147 Module Dhcp Level PCR 31152 Module Dhcp LevelPCR 31159 Module FW, Vlan Level PCR Module User LevelPCR 02414 Module IPV6, SWI, IPG, Vlan PCR Module BGP, IP LevelPCR 02577 Module IPG, LOG Level PCR Module ETH, IPG, IPv6, IPX Level PCR Module OSPF, IPG LevelPCR 03622 Module Enco Level PCR Module TTY, User Level PCR Module BGP LevelPCR 03751 Module Mlds Level PCR Module Install Level PCR Module ETH LevelPCR Module Ikmp Level PCR 03801 Module Mlds LevelPCR Module IPG, IPV6 Level PCR 03870 Module SWI, Vlan Level PCR 03874 Module Dhcp LevelPCR Module Ping Level PCR Module DHCP, Telnet LevelPCR Module Switch Level PCR Module IGMP, SWI LevelPCR 03895 Module Dhcp Level PCR 03914 Module IPG, Vlan LevelPCR Module Ipsec Level PCR Module BGP, IPG Level PCR 31001 Module Dhcp LevelPCR 031020 Module PIM Level PCR Module IPG, SWI Level PCR 03515 Module Dhcp LevelPCR 03691 Module Dvmrp Level PCR 03698 Module Dvmrp LevelPCR 03708 Module Dhcp Level PCR Module IP LevelPCR 03779 Module Dhcp Level PCR 03788 Module Dhcp LevelPCR Module Rsvp Level PCR 03799 Module Dhcp LevelEnable and Disable Icmp Messages Enable IP Icmpreply MLD Snooping Igmp Snooping All-Group Entry Show IP Igmp Enable IP Igmp Allgroup Availability

86253-07 specifications

The Allied Telesis 86253-07 is a high-performance, versatile switch designed for enterprise networking environments. With its robust feature set and advanced technologies, the 86253-07 caters to a wide range of networking applications, making it an optimal choice for businesses seeking reliable and scalable connectivity solutions.

At the core of the Allied Telesis 86253-07 is its capability to deliver high-speed data transfer, accommodating demanding applications such as VoIP, video conferencing, and large file transfers. The switch supports Gigabit Ethernet ports, providing speeds of up to 1 Gbps for seamless connectivity between devices. This performance is supplemented by its Layer 2 and Layer 3 switching capabilities, allowing for efficient data routing and management across complex networks.

One of the notable features of the 86253-07 is its support for Power over Ethernet (PoE). This technology simplifies the deployment of network devices like IP cameras and wireless access points, as it enables the switch to deliver power and data over a single Ethernet cable. This not only reduces installation costs but also enhances flexibility in network design.

The switch also offers advanced security features to protect sensitive data and network infrastructure. It incorporates various protocols such as IEEE 802.1X for port-based network access control, ensuring that only authorized devices can connect to the network. Additionally, features like VLANs (Virtual Local Area Networks) allow for effective segmentation of network traffic, further enhancing security and performance.

Allied Telesis ensures that the 86253-07 is easy to manage and monitor with its user-friendly interface. The switch supports management protocols like SNMP (Simple Network Management Protocol) and provides web-based management options, making it accessible for IT administrators to configure and troubleshoot the network efficiently.

Another significant characteristic is its reliability and durability. Built with high-quality components, the 86253-07 is designed to withstand varying environmental conditions, ensuring uninterrupted network operation in challenging settings.

In summary, the Allied Telesis 86253-07 is a powerful switch equipped with Gigabit Ethernet, PoE support, advanced security features, and straightforward management options. Its combination of performance, reliability, and flexibility makes it an excellent solution for enterprises looking to enhance their networking capabilities.
Top Page Image Contents