AMC I-M15A user manual Heat Sink, Battery Cover, Water Sealed DC Power Receptacle

User manual-amc i-M15a_G

REAR PANEL

1. Heat Sink

The heat sink is water sealed and inside the heat ventilation holes on plastic rear cover. So, it will be very effectively venting the heat out from inside of the monitor and with complete water sealing feature.

2. Battery Cover

The battery of the Monitor is water sealed securely fixed inside the Battery Cover.

3. Water Sealed DC Power

Receptacle
	Power Cord Plug

Water sealed DC Power Receptacle

FRONT & TOP PANELS

1.POWER Button (Battery Power Button)

This is a Battery Power Button. It is a toggle switch and will only work when power adaptor is not plugged into i-M15a.

This is a special designed water sealed DC Power Receptacle for connecting 15VDC/4A power from Monitor Power Adaptor to the i-M15a Monitor for charging the battery of i- M15a.

Please pay careful attenuation to the plug connector. There is an indentation on the receptacle matching the key on the power cord plug to ensure the alignments between receptacle and power cord plug are correct.

Tighten the screw on power cord plug until snug. Do not overtighten or use pliers !

When power adaptor is not plugged into i-M15a, you can press the POWER button for 5 seconds to turn the battery power off.

Power Savings feature : When power adaptor is not plugged into i-M15a and i-M15a is on standby (OFF)

Page 6 of 12

PN: 21-i-M15a_IM