Alesis M1 Active Mk2 manual Inside Your NEW Speakers, About Powered Monitors

Page 12

About the M1 Active Mk2

INSIDE YOUR NEW SPEAKERS

✪If you’re in a hurry to get started, skip ahead to Chapter 2, “Speaker Installation”, for connection and placement tips.

ABOUT POWERED MONITORS

The M1 Active Mk2s combine a speaker and amplifiers in the same compact cabinet. Powered monitors are growing in popularity over the traditional separate amplifier and speakers for a number of reasons, convenience and ease of hookup being only one of them. You can connect a powered speaker directly to any line-level source (normally, the control room output of a mixer) simply by connecting a patch cord.

Another benefit is improved sound quality. With careful design, the speaker, amplifier and electronic crossover can be optimised for each other. The M1 Active Mk2s are biamplified, meaning that low frequencies and high frequencies are handled not only by separate speakers (the tweeter and the woofer), but by separate amplifiers. A pair of M1 Active Mk2s contain a total of four power amplifiers. Because of the increased efficiency of biamplification, these are much louder than a single-channel power amplifier of the same wattage feeding a passive crossover, as in other designs. New technology makes it possible to make these high-wattage amplifiers small enough to fit inside the speaker cabinet, with very little weight or size gain.

Since the M1 Active Mk2s are self-powered, DO NOT connect them to the speaker output of another amplifier (such as a powered mixer or hi- fi receiver). Connect them only to the line-level outputs of such devices (+4 dBu nominal, +24 dBu maximum).

10

M1 Active Reference Manual

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Reference Manual Alesis Contact Information Contents HOW to USE this Manual IntroductionImportant Safety Instructions Safety Symbols Used in this ProductPlease Follow These Precautions When Using this Product Contents/Safety Warnings Symboles Utilisés Dans CE Produit Instructions DE Sécurité Importantes FrenchContents/Safety Warnings ICES-003 Issue CE Declaration of Conformity About the M1 Active MK2 Unpacking and InspectionChapter About Powered Monitors Inside Your NEW SpeakersTone About the DriversMagnetic Shielding M1 Active MK2 BI-AMPLIFIERS & Electronic Crossovers M1 Active MK2 Power Supply Cabinet and Port DesignWHY the Tweeters are Offset About Nearfield Monitoring About the M1 Active Mk2 Speaker Installation Avoiding Reflections in the StudioReflection Prime Listening Position Stereo Nearfield Placement M1 Active MK2 Horizontal Placement Recommendation Vertical Placement Recommendation Playback Check Mode Vertical MID-FIELD Plugging the Ports to Adjust for Room Acoustics Speaker Installation AC Power Cable USE Clean PowerConnections GroundingPower Switch Input ConnectionsSetting the Input Level Control 85.0 Avoiding Damage Surround Sound About Surround SoundCenter Speakers in Music Mixes Placement of the Center M1 Active MK2 Speaker in the Studio Placement of Rear Surrounds Recommended positioning of surround speakersSurround Sound Wall Mounting Surround Sound Surround Sound Troubleshooting Troubleshooting IndexMaintenance CleaningService Obtaining Repair ServiceCustomers outside the USA and Canada Specifications EnclosureTransducers Crossover Section Amplifier SectionAcoustic Section GeneralIndex LineAlesis Limited Warranty Please Send in Your Warranty CardM1 Active Reference Manual

M1 Active Mk2 specifications

The Alesis M1 Active Mk2 is a well-regarded studio monitor designed for musicians, producers, and audio engineers seeking high-quality sound reproduction at an accessible price point. With a focus on delivering accurate sound and a balanced performance, the M1 Active Mk2 has become a popular choice for both home studios and professional environments.

One of the standout features of the M1 Active Mk2 is its bi-amplified design. Each speaker is powered by dedicated amplifiers that optimize the performance of the woofer and tweeter separately. This bi-amplification ensures clear and precise sound reproduction across the frequency spectrum. The 6.5-inch low-frequency driver is designed to deliver robust bass response while the 1-inch silk dome tweeter provides smooth high-frequency performance, resulting in a well-rounded audio experience.

The M1 Active Mk2 incorporates advanced technologies to enhance its performance. The monitor features a front-firing bass port that helps to minimize boundary coupling and improves the overall bass response, allowing for placement flexibility within the studio. This design reduces the risk of unwanted resonances caused by proximity to walls, ensuring accurate sound even in challenging acoustic environments.

Another important characteristic of the M1 Active Mk2 is its frequency response, which ranges from 55 Hz to 20 kHz. This wide frequency range makes it suitable for various musical genres and audio applications, enabling users to hear detailed nuances in their mixes. Additionally, the monitor is equipped with a rear-mounted EQ control, allowing users to tailor the sound to their specific acoustic space, mitigating the effects of room acoustics on playback.

Durability and design are also key aspects of the M1 Active Mk2. Its rugged enclosure is built to withstand the rigors of studio use while also providing a sleek and professional appearance. The monitors can be easily positioned on desktop surfaces or mounted on stands, making them versatile for different studio setups.

Overall, the Alesis M1 Active Mk2 stands out as a reliable and affordable option for anyone looking to improve their audio monitoring capabilities. With its bi-amplified design, advanced technologies, and customizable features, this studio monitor delivers impressive sound quality suitable for both amateur and professional recording applications. Whether mixing, mastering, or simply enjoying music, the M1 Active Mk2 is designed to deliver a true-to-source listening experience.
Top Page Image Contents